15
E
1 GB of free space on the hard disk is needed to install all the components of “Roxio
Creator LJB.”
Close all other software application before running the Setup program for “Roxio
Creator LJB.”
Log on to Windows as an administrator.
CAUTION
NOTE
Depending on the computer, preparatory steps may be necessary before installation.
Before installing the application, be sure to read the Operating Instructions or
Reference Manual of the computer.
1
Log on to Windows as an administrator.
2
Set “DVD Drive Utility Disc” in the drive.
3
At the [AutoPlay] message, click [Run SETUPUTIL.EXE]. [Utility Setup tool] screen
will appear (allow some time for disc recognition). When the setup program will not
run automatically, click (Start) and input [x:\setuputil.exe]
*1
in [Search programs
and files], and press
Enter
.
*1
“x” is the drive letter. You can change the letter to suit your preference.
4
Click [Roxio Creator Setup].
5
Select your language at [Setup], then click [OK].
Follow the on-screen instructions.
During the installation, you will be required to agree the License Agreement. After
reading the agreement, click [I accept the terms in the license agreement], then click
[Next].
6
Click [Finish].
7
A message appears advising that the computer must be restarted. Click [Yes].
Use the Packet Write function which Windows 7 includes so that you can write to a
CD-R, CD-RW, DVD-R, DVD-RW, +R, or +RW in the same way as in the floppy disk
operation.
To install the software application, follow the procedure below.
Installing Roxio Creator LJB
DFQW5658ZA_CF-VDM312U_OI_EGFJ.indb 15
2012/05/23 13:21:53
