17
Preparations
8
Create "User Accounts" to recognize this computer's user.
z
If you make mail settings or execute other operations (password reset disk
(
Î
page 18) etc.) before creating the user account, you will be unable to
use mail history or settings. Create the user account at this time.
A
Click [start]
*1
- [Control Panel] - [User Accounts] - [Create a new
account].
*1
Immediately after Windows setup, the screen may show a display as though [start]
has been clicked (i.e., [All Programs] and other menus may be shown above
[start]).
B
Enter a new name for the new account, then click [Next].
(For example: Matsushita)
z
The following character strings cannot be used as an account name
because they are already being used by the computer system.
CON, PRN, AUX, CLOCK$, NUL, COM1 - COM9, LPT1 - LPT9
C
Click [Create Account].
z
When you create the first new account, you can only select [Computer
administrator].
Once a “Computer Administrator” account has been created, you can
create additional limited user accounts.
D
Set the password.
z
When sharing this computer with multiple users, we recommend set-
ting a password for your own account.
z
When setting password, click the account for which you will set the
password, click [Create a password], and the password following the
onscreen instructions, and click [Create Password].
• Remember the password you have set. It is useful to input a hint in
[password hint] in case you forget your password. In addition, we rec-
ommend that you create a password reset disk beforehand (
Î
page
18).
Refer to “When the administrator password is forgotten” (
Î
page 36)
in “Dealing with Problems (Summary).”
E
Click [start] - [Turn Off Computer] - [Restart] to restart the computer.
F
At the Welcome screen, click the created user (user icon) to log-on.
z
If the password has been set, enter the password and click . You
cannot operate the computer until the proper password is entered.
Confirm that character input is not set to "Caps Lock" or "NumLk."
z
Note also that only the added user account will be displayed in the
Welcome screen. The account for the administrator created during
Windows setup will not be displayed.
9
Calibrate the touchscreen.
A
Click [start] - [All Programs] - [Fujitsu Touch Panel (USB)] - [Touch
Screen Calibration Utility].
B
Touch the "+" target mark and keep touching it until it blinks. Repeat this
operation for all 12 "+" target marks, then press the
Enter
key.
C
Select [Save & Exit].
NOTE
z
Calibrate the touchscreen for each account created.
This concludes the first-time use operation guidelines.