Panasonic CF-CDSM1VC Series, Руководство по эксплуатации

Страница: 4 / 16

How to use
UNDOCKING PROCEDURE
(6)
4
DOCKING PROCEDURE
( )
.
(
5
)
LOCKED UNLOCKED
Note: Power supply for FZ-M1 should be connected
before docking, if required. Before docking, the latch
must be positioned in the UNLOCKED position.
1. Insert FZ-M1 into the Mount Kit as shown.
2. Ensure the bottom of the FZ-M1 is located in the Mount Kit.
3. Push the top of the FZ-M1 into the top locking mechanism.
4. Position latch to LOCKED position as below.
NOTE:
Portions of your mount kit may differ somewhat from the illustrations in the
operating instructions, but this should present no problems in actual use. Be sure to
follow the operating instructions when using your vehicle mounter
5. Ensure the latch is in the UNLOCKED position.
6. Remove the FZ-M1 from vehicle mounter.