Panasonic CF-29CTKGZ1M, Руководство по обслуживанию, Страница: 27 / 53

24
12.6. Removing the Speaker
Figure 6
1. Remove the three Screws. <J>
2. Remove theSpeaker.
3. Remove the two Screws. <K>
4. Remove the Heat Pipe Unit Bottom
5. Remove the four Screws. <L>
6. Remove the MP Eject Lerver.
7. Remove the two Screws. <M>
8. Remove the MP Eject Bousui Plate.
Screw<J>: D3ZLT
<K>: D3ZLT
<L>: F5NLT
<M>: 4FZLT
12.7. Removing the Wireless Module
Figure 7
1. Disconnect the Cable from Connector (CN2).
2. Remove the Wireless Module.
12.8. Removing Main PCB, EXT
Antenna and RTC Battery
Figure 8
1. Remove the two Screws. <N>
2. Remove the seven Screws. <O>
3. Remove the five Screws. <P>
4. Disconnect the six Cables from six Connectors.
(Main PCB:CN6,CN9,CN10,CN51,CN54)
(EXT Antenna:CN1)
5. Remove the EXT Antenna.
6. Remove the Main PCB.
7. Disconnect the Cable from Connector. (CN4)
8. Remove the RTC Battery
Screw<N>: DFHE5118ZA
<O>: DFHE5025XA
<P>: DFHE5058ZA
<L>
<M>
<K>
<K>
<M>
<L>
<L>
<L>
<J>
<J>
<J>
MP Eject
Lever
MP Eject BOUSUI
Plate
HEAT Pipe Unit
Bottom
Speaker
Bottom Cover
<N>
<N>
<O>
<O>
<O>
<O>
<O>
<O>
<O>
EXT Antenna PCB
Connector
CN1
to Connector
(CN4)
RTC Battery
Connector CN54
(front side)
Connector CN10
(front side)
Connector CN51
(front side)
Connector CN6
(reverse side)
Connector CN9
(reverse side)
Connector CN1
(reverse side)
to Connector
(CN6)
to Connector to Connector
(CN9)
to Connector
(CN950)
to Connector
(CN51)
to Connector
(CN54)
to Connector
(Main PCB CN1)
to Connector
(CN10)
Connector CN4
(reverse side)
Nain PCB
<P>
<P>
<P>
<P>
<P>
(EXT Antenna CN1)
to Connector
(CN2)
to Connector
(CN952)
Wireless Module
Main PCB
Connector CN2