20
Getting Started
A
Run [Touch Settings].
Click [start] - [Control Panel] - [Other Control Panel Option] - [Touch Set-
tings].
B
Press
Ctrl
and click [Calibrate...].
C
Touch each of the 4 “+” target marks one by one, and then click [Finished].
9
Restart the computer.
10 Create a new account.
Click [start] - [Control Panel] - [User Accounts] - [Create a new account].
CAUTION
Remember your password. If you forget the password, you cannot use the Win-
dows operating system. Creating a password reset disk beforehand is recom-
mended.
NOTE
PC Information Viewer
This computer periodically records the management information including the hard disk information, etc. The maximum
data volume for each record is 1024 bytes.
This information is only used for estimating the cause when the hard disk goes down by any possibility. They are never
sent to outside via network nor used for any other purpose except for the purpose described the above.
To disable the function, add the check mark for [Disable the automatic save function for management information history]
in [Hard Disk Status] of PC Information Viewer, and click [OK].
(
Reference Manual
“Checking the Computer’s Usage Status”)
Precaution against Starting Up/Shutting Down
Do not do the following
Connecting or disconnecting the AC adaptor
Sliding the power switch
Touching the keyboard, touch pad, touchscreen, dual touch or external mouse
Closing the display
Turn on/off the wireless switch
NOTE
To conserve power, the following power saving methods are set at the time of purchase.
The screen automatically turns off after 15 minutes of inactivity.
The computer automatically enters sleep
*5
(
)/standby
*5
(
) after 20 minutes of inactivity.
*5
Refer to
Reference Manual
“Sleep or Hibernation Functions” (
)/“Standby or Hibernation Func-
tions” (
) about resuming from sleep/standby.
Precaution against Logging on to Windows
Do not log on to Windows by the Guest account.
Note about access to the hard disk
<For MUI OS model>
Languages other than the one selected at Windows Setup are uninstalled in the background while the computer stays
idle.
During this period of time, the following issues may occur. These are caused by the speci
fi
cations of Windows 7 and
are not a malfunction.
• The uninstall process may continue for approximately 3 hours, during which time the computer may become un-
responsive due to a continuous access to the hard disk, etc. You can restart or shutdown the computer during the
process.
• The message “Con
fi
guring Windows features, preparing to con
fi
gure Windows” may appear for up to about 20 min-
utes when shutting down or starting up the computer (including restart). Wait for the computer to shut down or start
up normally.
First-time Operation
CF-19mk4(CPE02270XA)_OI_EN.indb 20
CF-19mk4(CPE02270XA)_OI_EN.indb 20
1/17/2011 1:59:30 PM
1/17/2011 1:59:30 PM