38
Port Replicator / Car Mounter
8
Click [Finish] and click [Close].
9
When the message requests restart of Windows, click [Yes].
The computer will restart.
NOTE
z
If you cannot use the functions of the external mouse and trackball even after the steps above, perform the steps
below.
A
Turn off the computer and connect to the port replicator or to the car mounter.
B
Connect the external mouse or trackball to the port replicator or to the car mounter.
C
Turn on the computer and start up the Setup Utility (
).
D
Select the [Main] menu, and set [Touch Pad] to [Disable].
E
Press
F10
, and then select [Yes] and press
Enter
.
F
Log on to Windows as an administrator.
G
When [Completing the Found New Hardware Wizard] appears, click [Finish].
H
When the message requests restart of Windows, click [Yes].
The computer will restart.
I
Install the necessary driver following the operating instructions of the connected device.
