CQ-C9901U/C9801U/C9701U
31
English
30
XM Tuner
(XM Direct
TM
receiver)
An optional XM Direct
TM
receiver allows you to receive the XM radio service.
Note: A changer and an XM Direct
TM
receiver are not connectable at the same time.
CQ-C9901U/C9801U/C9701U
1
Press
[SRC]
(Source) to select the XM
tuner.
2
Press
[BAND]
to select a band.
Preparation:
¡
Connect the optional XM Direct
TM
receiver
(XMD1000).
¡
To connect the XM Direct
TM
receiver
(XMD1000), it is required to use an optional
extension cord
(XMDPAN100)
that is produced
by XM exclusively for Panasonic products.
Notes:
¡
“RADIO ID” is displayed with channel 0.
¡
“UPDATING” is displayed during the update of the
identification code.
¡
“LOADING” is displayed during the acquisition of
audio data or information.
3
Select a station.
Channel selection
[
]
]
(
TUNE
):
Preceding channel
[
[
]
(
TUNE
):
Next channel
Preset station selection
[
{
]
(
P·SET
: Preset):
Lower preset channel
[
}
]
(
P·SET
: Preset):
Higher preset channel
Note:
Direct Access can be executed with
[1]
to
[6]
buttons on remote control.
1
Press
[MENU]
to
display the menu
display.
For using the remote
control, hold down
[MENU]
for 2 sec. or
more.
2
Press
[
}
]
or
[
{
]
to select a mode to be
adjusted.
3
Press
[BAND]
(
SET
) to adjust.
4
Press
[MENU]
to confirm the adjust-
ment.
For using the remote control, hold down
[MENU]
for 2 sec. or more.
TEXT
Text display
: Enabled (default)
: Disabled
TEXT Setting (XM T
uner Menu Display)
(TEXT)
Operation Flow
SRC
CS
SRC
You can toggle the category on and off every time you
hold down
[BAND]
for 2 sec. or more. If the category is
set to on, the unit operates as follows for each button:
Channel selection
[
]
]
(
TUNE
): Preceding channel in current category
[
[
]
(
TUNE
): Next channel in current category
Category selection
[
{
]
(
P·SET
: Preset): Preceding category
[
}
]
(
P·SET
: Preset): Next category
Selection by Categor
y
(P·SET: Preset)
SRC
CS
Band
Channel number/name
Preset Number
Artist name/Song title
Indicates the intensity of
the radio wave.
Indicates the satellite tuner
is ready.
Channel Preset
(P·SET: Preset)
Up to 6 channels can be preset in XM1 to XM3.
Preset channels can be simply called up by pressing
[
}
]
(
P·SET
) or
[
{
]
(
P·SET
).
Note:
Direct Access can be executed with
[1]
to
[6]
buttons on remote control.
1
Tune in to a channel.
2
Hold down
[
}
]
or
[
{
]
for 2 sec. or
more.
3
Select a preset number by pressing
[
}
]
or
[
{
]
.
4
Preset the channel by holding down
[
}
]
or
[
{
]
for 2 sec. or more.
channnel name/preset number blinks once.
Notes:
¡
New channels overwrite existing saved stations.
¡
In step 2, a channel can be registered by holding
down the numeric button
[1]
to
[6]
on the remote
control unit for 2 sec. or more.
¡
To stop presetting, press
[DISP]
(Display)
.
Direct Access
A channel can be directly selected.
Example
: channel number 5
1
Press
[#] (NUMBER)
.
2
Press
[5]
.
3
Press
[SET]
.
Note:
To suspend direct selection, press
[DISP]
(Display)
.
Functions only by
remote control unit
Lights when category is activated.
XM T
uner (XM Direct
TM
receiver)
XM mode display
