9
8
E
N
G
L
I
S
H
CQ-C3433U/C3403U/C3333U/C3303U
Preparation
Warning
¡
Keep a battery away from children to avoid the risk of
accidents. If an infant ingests a battery, please seek
immediate medical attention.
Caution
¡
Remove and dispose of an old battery immediately.
¡
Do not disassemble, heat or short a battery. Do not
throw a battery into a fire or water.
¡
Follow local regulations when disposing of a battery.
¡
Improper use of a battery may cause overheating, an
explosion or ignition, resulting in injury or a fire.
Note:
¡
Battery Information:
Battery Type: Panasonic lithium battery (CR2025)
(Included in the remote control)
Battery Life: Approximately 6 months under normal use
(at room temperature)
The demonstration message appears for initial
use.
q
Set your car’s ignition switch to the ACC or ON position.
The demonstration screen appears.
w
Press
[SRC/PWR]
to turn on the power.
e
Press and hold
[VOLUME] (PUSH SEL)
for more
than 2 seconds to open the menu.
r
Press
[VOLUME] (PUSH SEL)
to select the
Demonstration setting. (“DEMO” is displayed.)
t
Turn
[VOLUME]
counterclockwise. (Press
[0] (
{
)
on
the remote control unit.)
Note:
¡
To return to the regular mode, press
[D] (DISP)
.
¡
Refer to the section on “Function Settings”.
(
a
Page 22)
Remote Control Unit
Main Unit
The 12-hour system is used for the clock.
q
Press
[SRC/PWR]
to turn on the power.
w
Press
[D] (DISP/CLOCK)
.
Clock display
e
Press and hold
[D] (DISP/CLOCK)
for more than 2
seconds.
Hour blinks
r
Adjust the hour.
[
[
]
: put forward hour.
[
]
]
: put back hour.
Hour entered
t
Press
[D] (DISP/CLOCK)
.
Minute blinks
y
Adjust the minute.
[
[
]
: put forward minute.
[
]
]
: put back minute.
Minute entered
u
Press
[D] (DISP/CLOCK)
.
Completed
Note:
¡
“ADJUST” is displayed before adjusting the clock.
¡
Press and hold
[
[
]
or
[
]
]
to change numbers rapidly.
Cancellation of Demonstration
Clock Setting
[SRC/PWR]
(Power)
[D] (DISP/CLOCK)
[
]
] [
[
]
(Hour/minute adjustment)
Preparation Before Initial Use
Pull the insulation film out from the
backside of the remote control gently.
Battery Replacement
q
Remove the battery holder with the
remote control unit placed on a flat
surface.
q
Stick your thumbnail into the
groove and push the holder in the
direction of the arrow at the same
time.
w
Pull it out in the direction of the
arrow using a tough pointed object.
w
Put a battery in the case with (+) side
facing up.
e
Put the case back.
Tough pointed
object
Back side
[VOLUME]
(PUSH SEL
: select
)
