background image

2

indicates safety information.

CAUTION

RISK OF ELECTRIC SHOCK

DO NOT OPEN

CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, 

DO NOT REMOVE COVER (OR  BACK).

NO USER SERVICEABLE PARTS INSIDE.

REFER TO SERVICING TO QUALIFIED SERVICE PERSONNEL.

The lightning flash with arrowhead symbol,
within an equilateral triangle, is intended to
alert the user to the presence of uninsulated
“dangerous voltage” within the product’s
enclosure that may be of sufficient magnitude
to constitute a risk of electric shock to per-
sons.

The exclamation point within an equilateral tri-
angle is intended to alert the user to the pres-
ence of important operating and maintenance
(service) instructions in the literature accom-
panying the appliance.

WARNING:

TO REDUCE THE RISK OF FIRE OR SHOCK
HAZARD, DO NOT EXPOSE THIS EQUIP-
MENT TO RAIN OR MOISTURE AND KEEP
THIS EQUIPMENT AWAY FROM ALL LIQ-
UIDS—USE AND STORE ONLY IN LOCA-
TIONS WHICH ARE NOT EXPOSED TO THE
RISK OF DRIPPING OR SPLASHING LIQUIDS,
AND DO NOT PLACE ANY LIQUID CONTAIN-
ERS ON TOP OF THE EQUIPMENT.

CAUTION:

TO REDUCE THE RISK OF FIRE OR SHOCK
HAZARD AND ANNOYING INTERFERENCE,
USE THE RECOMMENDED ACCESSORIES
ONLY.

FCC Note:

This device complies with Part 15 of the FCC Rules.
To assure continued compliance follow the attached
installation instructions and do not make any unautho-
rized modifications.
This equipment has been tested and found to comply
with the limits for a class A digital device, pursuant to
Part 15 of the FCC Rules.  These limits are designed
to provide reasonable protection against harmful inter-
ference when the equipment is operated in a commer-
cial environment.  This equipment generates, uses,
and can radiate radio frequency energy and, if not
installed and used in accordance with the instruction
manual, may cause harmful interference to radio com-
munications.  Operation of this equipment in a resi-
dential area is likely to cause harmful interference in
which case the user will be required to correct the
interference at his own expense.

CAUTION:

TO REDUCE THE RISK OF FIRE OR SHOCK
HAZARD, REFER MOUNTING OF THE
OPTIONAL UNIT TO AUTHORIZED SERVICE
PERSONNEL.

CAUTION:

Do not install or place this unit in a book-
case, built-in cabinet or any other confined
space in order to maintain adequate ventila-
tion. Ensure that curtains and any other
materials do not obstruct the ventilation to
prevent risk of electric shock or fire hazard
due to overheating.

Notice (U.S.A.only):

This product has a fluorescent lamp that con-
tains a small amount of mercury.
It also contains lead in some components.
Disposal of these materials may be regulated
in your community due to environmental con-
siderations.
For disposal or recycling information please
contact your local authorities, or the
Electronics Industries Alliance:
<http://www.eiae.org.>

For your safety

Содержание BTLS1400 - 14" LCD MONITOR

















Отзывы: