Panasonic BT-LH910G, Брошюра и характеристики

Страница: 5 / 6

Outstanding Display Performance, Extensive Recording Assist Functions
and a Wealth of Interfaces for Broadcasting Use.
Cine-gamma and New Black Mode
The BT-LH910G is equipped with a cine-gamma (F-REC)
compensation function and serves as a monitor for the Varicam
camera recorder. The new black mode also makes dark image
areas in low-gradation scenes easier to see. It helps to produce
movies as well as film-like HD programs and commercial.
New Audio Level Meter and Headphone Terminal
The new color audio level meter
displays the embedded audio
(3G-SDI, SDI, HDMI*) input level.
And it's equipped with reference
point setting, peak hold and over-
range display functions. The
BT-LH910G is also provided with a
headphone terminal. The channel to be monitored is easily
selected from the menu.
*For HDMI input, the level meter displays only two channels.
WFM (Y/R/G/B) and Vector Scope Display
The BT-LH910G has built-in
waveform monitor and vector
scope functions to display the
input signal waveform and color
gamut. For waveform display, the
signal can be selected from Y, R,
G and B.
*The WFM function can be used for all input signals. The vector scope function can be used for
3G-SDI and SDI input.
Focus Assist Functions for HD Shooting
• Focus-in-Red: Emphasizes the
sharply focused area of the image
by showing it in an easily visible
red.
• Pixel-to-Pixel: Displays video
pixels without any resizing. With
1080i/p input signals, you can
check the focus with a screen
width equivalent to 34.3 cm (13.5 inches).
Closed Caption and Time Code Display
The BT-LH910G can display
closed captions with an SDI or
VIDEO input. It supports the
EIA-708 HD-SDI closed captioning
standard (EIA-608 SD-SDI closed
captioning standard), and can
display up to eight windows
simultaneously. The BT-LH910G can also display the time code
(selectable from VITC, LTC and UB) with an SDI input.
Various Markers
Various markers can be displayed
in both 16:9 and 4:3 aspect
ratios.
• Aspect Marker (16:9):
4:3, 13:9, 14:9, CNSCO2.39,
CNSCO2.35, 2:1 or VISTA,
with background brightness
control of Black (0%), Half (50%) or Normal (100%).
• Safe Area Marker (16:9/4:3): 95%, 93%, 90%, 88% or 80%.
• Center Marker (16:9/4:3): ON/OFF. The center marker can be
displayed together with another marker, as shown in the example
above. In 16:9 mode, the BT-LH910G can display a superimposed
safe area marker corresponding to the aspect marker which is
selected.
A Diversity of Display Functions
• Cross Hatch Overlay: Displays
grids with 40 or 80 pixel intervals.
This is useful for horizontal/vertical
adjustment.
• HV Delay Display: Displays the
video blanking period.
• Mono Mode: Displays images in
black-and-white.
• Split Screens: A frame of video can easily be frozen and
displayed as a still image on the left side of the screen. This
function can be used to match a live camera with a frame of video
shot at an earlier time or with a different camera.
Three Function Keys
Each of the function keys can be assigned with a function selected
from various display and switchover functions to enable one-touch
ON/OFF or mode change.
Functions Assignable to Function Keys
HV Delay/Blue Only/Gamma Select/SD Aspect/Scan/Sub Window/
WFM/Vector/Marker/White Balance/Pixel To Pixel/Pixel Position/
Focus-In-Red/Zebra/Rear Tally/Level Meter/Cross Hatch/Mono/
Black Mode/Time Code/Closed Caption/Undef
Versatile Input Terminals, Including 3G-SDI and HDMI
The BT-LH910G is equipped with input terminals for 3G-SDI, SDI
(HD and SD), HDMI, composite (Video) and component (YP
B
P
R
)
signals. It supports almost all HD/SD video signals for use in
various applications worldwide.
Viewfinder Connector
Equipped with a 15-pin viewfinder terminal, the BT-LH910G can
also be used as a viewfinder for compatible Panasonic camera
recorders* (requiring the optional BT-CS910G
VF Cable).
*AJ-HPX3700, AJ-HPX2700, AJ-HPX3100, AJ-HPX2000, AJ-HPX2100, AJ-HDX900,
AG-HPX500 series (AG-HPX500 series displays SD resolution in black-and-white.). Optional
hardware is required for mounting to a camera recorder.
Designed for Broadcast Field Work
• Tilt stand and headphone terminal.
• The front and rear tally lamps are also functional when the
monitor is used as a camera viewfinder.
• SERIAL (9-pin) and GPI (9-pin) remote input terminals.
• The slim, lightweight, compact body allows flexible installation
and setup.
• Robust, durable magnesium diecast frame.
• DC drive. Anton Bauer battery can be mounted to the back.
Focus-in-Red ON
Input Level
Luminance
75%
Normal Mode
Black Mode
Black Mode ON
*Pictures simulated.
Safe Area /Center Marker