Useful Display Functions for Professional Use
Various Markers
[2550] [1760] [1710] [900A] [80WU]
Various markers can be
displayed in both 16:9 and 4:3
aspect ratios.
•
Aspect Marker (16:9):
4:3,
13:9, 14:9, CNSCO or VISTA,
with background brightness
control of Black (0%), Half (50%)
or Normal (100%).
•
Safe Area Marker (16:9/4:3):
95%, 93%, 90%, 88% or 80%.
In 16:9 mode, the BT-LH2550/
LH1760/LH1710/LH80WU can
display a superimposed safe
area marker corresponding to
the aspect marker’s angle of
view.
•
Center Marker (16:9/4:3):
ON/OFF. The center marker can
be displayed together with
another marker, as shown in the
example on the left.
Cross Hatch Overlay
[2550] [1760] [1710] [80WU]
A simple cross hatch overlay can
be displayed (at 120* dots
interval, fixed) to check the tilt of
the camera. You can also
allocate the cross hatch function
to any of the three function keys.
*80 dots for the BT-LH1760/LH1710,
50 dots for the BT-LH80WU.
Waveform Monitoring
[2550] [1760] [1710] [900A] [80WU]
All lines of the input signal is
displayed as a waveform for
monitoring. The BT-LH2550/
LH1760/LH1710 waveform
display can be positioned in any
of the four corners of the screen.
The BT-LH900A/LH80WU
waveform is displayed in the
lower right portion of the screen.
Vectorscope Display
[2550] [1760] [1710]
All lines of the input signal is
displayed as a vectorscope, and
can be positioned in any of the
four corners of the screen.
HV Delay Display and Mono Mode
[2550] [1760] [1710] [900A*
1
] [80WU*
2
]
The HV Delay function that displays the video blanking period, and
the Mono mode that switches the display to black-and-white can
be assigned to function keys for quick access.
*1: LH900A: not assignable on function keys (need to be set on menu).
*2: LH80WU: Mono Mode only.
Pixel-to-Pixel Display
[1760] [1710] [80WU]
This function lets you display
and confirm video pixels input in
HD-SDI without any resizing.
In the BT-LH1760/LH1710, this
function is useful for image
confirmation. When using 1080i,
choose from five display areas:
center, right-top, right-bottom, left-top or left-bottom. In the
BT-LH80WU, this function facilitates focusing. With 1080/60i input
signals, you can check the focus with a screen width equivalent to
19 inches.
Coordination of Multiple Cameras on Split Screens
[2550] [1760] [1710]
A frame of video can easily be
frozen and displayed as a still
image on the left side of the
screen. This function can be
used to match a live camera with
a frame of video shot at an
earlier time or with a different camera. There are two display
modes: FULL for displaying and comparing the entire image on the
screen, and PART for displaying and comparing only the center
part of the images. (FULL-only on LH2550)
Audio Level Meter Overlay
[2550] [1760] [1710]
The BT-LH2550/LH1760/LH1710
come with an audio embedded
function. In addition, the
SDI-input audio level can be
displayed on the screen with a
white skeleton bar meter. Choose
from 2-channel/4-channel/
8-channel/OFF for the display.
Time Code Display Function
[2550] [1760] [1710]
With HD-SDI input, this function
displays the value of the VITC,
LTC or UB time code, depending
on which one has been selected.
Closed Caption Function
[2550] [1760] [1710]
When an NTSC video signal is
input, this function can display
close captions (32 characters x
15 lines). The display mode can
be selected from CC1, CC2,
CC3 or CC4.
Cine Gamma Compensation
[2550] [1760] [1710] [900A]
Equipped with a cine-gamma (F-REC) compensation function for
compatibility as a monitor for the Varicam AJ-HDC27H Camcorder.
This function supports the production of movies, film-like HDTV
programs, and TV commercials.
Focus-in-Red Function for HD Shooting
[80WU]
This function emphasizes the
sharply focused area of the
image by showing it in an easily
visible red, making it easier to
focus the HD camera.
4:3 Aspect Marker
Safe Area and Center Marker
4:3 Aspect and Safe Area Marker
(BT-LH2550/LH1760/LH1710/LH80WU)
ON Image
OFF Image
