Panasonic BT-H1700P Скачать руководство пользователя страница 58

Страница: 58 / 121

HORIZONTAL/VERTICAL IMAGE POSITION, IMAGE AMPLITUDE AND IMAGE DISTORTION ADJUSTMENTS (SDTV OVERSCAN 4:3 MODE)

Note:

• The adjusted data becomes the reference value for the

SDTV underscan 4:3 mode and SDTV overscan/underscan
16:9 modes. When the data is changed, it is required to
re-adjust the underscan data and SDTV overscan/
underscan 16:9 mode data for the same adjustment sig-
nal.

1. Apply the 480/60i size adjustment signal to INPUT A (Terminal Y on

the Component/RGB Input Card).

2. Set the CONTRAST and BRIGHT potentiometers on the front panel

to the center click positions.

3. Adjust DE04 in the Service Menu to set the vertical position of the

image at the center of the CRT screen.

4. Adjust the horizontal image amplitude with DE02 to match the 95%

line of the size adjustment signal onto the edge of the escutcheon.

5. Apply the 480/60i crosshatch signal to INPUT A.
6. Adjust DE11 to set the sizes of the rectangles at the center of the

image and those at the left and right ends to be identical.

7. Adjust DE12 to set the sizes of the rectangles at the center of the

image and those at the top and bottom to be identical.

8. Ensure that the center position is not deviated. If it is, adjust DE04

again.

9. Adjust DE11, DE12 and DE04 repeatedly until the center position

and vertical linearity are optimized.

10. Adjust DE09 to optimize the trapezoidal distortion (observe the sec-

ond vertical lines from the left and right edges as the reference).

11. Adjust DE08 to optimize the parallelogram distortion (observe the

second vertical lines from the left and right edges as the reference).

12. Adjust DE10 to optimize the horizontal arc distortion.
13. Adjust DE05 so that the second vertical lines from the left and right

edges are linear.

14. If there is an extreme corner S-shape distortion, adjust DE07 to

optimize it (this adjustment is usually unnecessary).

15. If there is an extreme corner W-shape distortion, adjust DE06 to

optimize it (this adjustment is usually unnecessary).

16. Apply the 480/60i size adjustment signal to INPUT A.
17. Observe the vertical amplitude of the image. If it is dislocated, ad-

just DE02 again.

18. Adjust DE03 so that the horizontal position of the image comes at

the center of the CRT screen.

19. Adjust the horizontal image amplitude with DE01 to match the 95%

line of the size adjustment signal onto the edge of the escutcheon.

20. Vary the adjustment signal and adjustment data, and re-perform

adjustments in steps 1 to 19 above (see Table 10).

Measuring Instruments

Signal generator (Size adjustment signal, Crosshatch signal)

Card (Slot)

Component/RGB Input Card (Slot 1)

Test Points

Adjustment Points

D*01 (Horizontal Size), D*02 (Vertical Size), D*03 (Horizontal Position), D*04 (Vertical Position), D*05 (Side

Pin Distortion), D*06 (Corner Distortion (W)), D*07 (Corner Distortion (S)), D*08 (Parallelogram Distortion),

D*09 (Trapezoidal Distortion), D*10 (Horizontal Arc Distortion), D*11 (Vertical Linearity (S Correction)), D*12

(Vertical Linearity (C Correction)) [Service Menu]

Make these lines linear.

Escutcheon

95% line

Screen size

Adjustment

Step No.

signal

Data

480/60i

480/60p

576/50i

Table 10

Содержание BT-H1700P


























































































































Результаты поиска

Содержание BT-H1700P

Отзывы:

Похожие инструкции для BT-H1700P

Бренды по названию

Популярные бренды

Panasonic BT-H1700P, Руководство по обслуживанию

Результаты поиска

Содержание BT-H1700P

Отзывы:

Похожие инструкции для BT-H1700P

Бренды по названию

Популярные бренды