![background image](http://html.mh-extra.com/html/panasonic/bl-c210a/bl-c210a_setup-manual_277426002.webp)
Confirmation
If the camera detects motion
Panning and tilting the lens
Additional Information
Use the remote control included with your TV to view camera images on your TV.
• Still images (JPEG) from up to 4 or 8 connected cameras registered to the TV are
displayed on the multi screen.
• The [VIERA Link] menu is displayed.
• Press the [R] (red) button to switch between 4-camera and 8-camera display.
• Live images from the selected camera are displayed.
4-camera display
• The TV will search for cameras that are available for registration.
• After the camera is registered, it is displayed in the network camera list.
• The camera menu is displayed.
• Repeat this step as necessary.
• Repeat this step as necessary.
If the camera’s heat sensor and motion sensor features detect motion, the following
message is displayed on the screen.
Press the [OK] button to display the camera image, or press the [RETURN] button to
cancel the message. Once a sensor is triggered, sensor features will be inactive for
60 seconds by default. Refer to the Operating Instructions (for VIERA Connection) on
the included CD-ROM for more information on using and configuring the camera’s
sensor features.
1. Press the [VIERA Link] button.
2. Press [
D
] or [
C
] to select [Network Camera], then
press the [OK] button.
3. Select the desired camera, then press the [OK]
button.
4. Press and hold the camera’s PRIVACY button for
about 3 seconds, until the AV LINK indicator flashes.
5. Select [Yes], then press the [OK] button.
8-camera display
NetworkCamera
Moving object detected
Configuring the camera
You can configure certain camera settings while accessing the camera with the TV.
To pan or tilt the camera lens while viewing the single screen, press [
F
], [
E
], [
D
], or [
C
].
You can aim the lens at pre-programmed positions called presets. You can register up to 8
presets. Presets 1-4 are registered by default. To aim the camera lens at a preset position,
press the corresponding number button on the remote control ([1] to [8]). For information
on changing the presets or adding additional presets, refer to the Operating Instructions
(for VIERA Connection) on the included CD-ROM.
You can aim the lens at the pre-programmed home position by pressing the [0] button. The
home position is the position the camera lens aims at when the camera is turned on.
If [PRIVACY] is displayed
If [PRIVACY] is displayed, the selected camera is in privacy mode and cannot be
accessed. Press the camera’s PRIVACY button to turn off privacy mode.
For more information
For more information on operating and configuring the camera using your TV, refer to the
Operating Instructions (for VIERA Connection) on the included CD-ROM.
For information on troubleshooting issues when using the camera with your TV, refer to the
Troubleshooting Guide (for VIERA Connection) on the included CD-ROM.
R
G
B
Y
Select
RETURN
OK
Network cameras list
Model
Status
Default
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
Camera name
XX-XXXX
Connected
NetworkCamera
Find cameras
Delete
Disconnect
Default camera
Select
Change
RETURN
Network Camera
TV
VIERA Link control
Speaker output
Record now
Stop recording
1. While viewing camera images on the single screen,
press the [MENU] button.
2. P
ress [
D
] or [
C
] to select the desired item, then press
the [OK] button to display the next screen.
3. Once the desired screen is disp
layed, press [
F
] or
[
E
] to change the setting, then press the [OK] button
to change the setting.
Press the [RETURN] button when finished to return
to the menu or previous screen.
Select
OK
RETURN
R
4 cam / 8 cam
Camera name
NetworkCamera
Model
XX-XXXX
Multi screen
(1/4)
R
4 cam / 8 cam
Select
OK
RETURN
1
-
9
Camera name
NetworkCamera
Model
XX-XXXX
Multi screen
(1/9)
Select
RETURN
OK
Camera menu
Brightness
Sensor preview
Preset settings
Camera settings
Camera details
• This item may be on the second screen of the [Setup] menu. Scroll down until
[Network cameras list] is displayed.
• The camera illustrations in this document
depict the BL-C210.
If the POWER indicator lights in red, the
camera’s privacy mode feature has been
activated. Press the PRIVACY button to
deactivate privacy mode, then press and hold
the PRIVACY button for about 3 seconds.
• AV LINK indicator flashes orange in the
registration mode.
• Complete the next step within 5 minutes.
If no cameras are registered to the TV:
A message is displayed prompting you to begin searching for cameras.
If a camera is already registered to the TV:
The network camera list is displayed. Press the [R] (red) button to register another
camera. Up to 8 cameras can be registered to the TV.
3. Select [Network cameras list], then press the [OK]
button.
Please refer to camera
’s settings and enable its link
mode.
Start searching for network camera?
Yes
No
Please refer to camera
’s settings and enable its link
mode.
Start searching for network camera?
Yes
No
PRIVACY
button
AV LINK
indicator
Once you have registered the camera to the TV and confirmed that
camera images can be viewed using the TV, you may disconnect
the camera and install it in the location where it will be permanently
used. For information on installing the camera, refer to the
Installation Guide.
Select
Change
RETURN
Setup
2/2
Advanced setup
About
Reset
VIERA Link settings
Network setting
VIERA CAST setting
Network cameras list
Eco mode setting
Preset position
Home position
1
-
9
0
Pan
Tilt
RETURN
Single screen
Camera name
NetworkCamera
Model
XX-XXXX
•
For the camera’s wireless connection, refer to the Setup Guide for
wireless settings after completing registration and confirmation
(BL-C230 only).