manualshive.com logo in svg

Panasonic BL-C111A - Network Camera - Pan, Руководство по эксплуатации

Поделиться
Скачать
Panasonic BL-C111A - Network Camera - Pan Скачать руководство пользователя страница 98

5.6  Changing Audio Settings

The [Audio] page of the [Setup] tab allows you to adjust audio feature-related settings.

1.

Click the [Setup] tab.

2.

On the left side of the screen under [Basic], click [Audio].

3.

Under [Input], select whether the camera’s built-in microphone is enabled or disabled.

4.

Under [Camera Microphone Sensitivity], select the desired setting.

–

[Minimum]: Sets the microphone to minimum sensitivity. Less sound is picked up by the microphone.

–

[Standard]: Sets the microphone to standard sensitivity.

–

[Maximum]: Sets the microphone to maximum sensitivity. More sound is picked up by the microphone.

5.

Under [Mute during Pan/Tilt], select whether the camera’s built-in microphone is automatically muted when
the camera is panning or tilting.

•

This feature is disabled by default.

•

When this feature is set to [Disable], the microphone will be enabled when the camera pans or tilts.
The sound of the lens moving may be picked up by the microphone.

6.

Click [Save].

98

Operating Instructions

5.6 Changing Audio Settings

Содержание BL-C111A - Network Camera - Pan



























































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды