Important Information
11
2.2
Modifying or Deleting This Software
To modify or delete this software, follow the steps below.
1.
Insert the CD-ROM into your PC.
•
Installation Selection window automatically appears.
•
If Installation Selection window does not appear, double-click
"autorun.exe" file on the CD-ROM.
2.
Click [Install Network Camera Recorder with Viewer Software].
•
If this software have been installed, the following window is displayed.
3.
Check [Repair Network Camera Recorder with Viewer Software] or [Remove
Network Camera Recorder with Viewer Software], and click [Finish].
•
If the modification or deletion is complete, the confirmation window is
displayed.
Note
If you delete this software, the camera settings and recorded images are
not deleted. To delete them, manually delete NCR3 folder at the
destination.