Panasonic BB-HCM580A, Руководство по обслуживанию

Страница: 53 / 93

53
BB-HCM580A
9.5. Video Adjustment Procedure
1. Tools
•Collimator
•Light Box
•Color Chart
•Color Temp. Conversion Filter for 5100K
2. Adjustment Procedure
1. Place the Color Temp. Conversion Filter in the HP light box.
2. Remove the Focus Chart block from the Collimator and attach it with screwing its end into the rotating ring on the front of the
light box.
3. Install the Active-X for the Video Adjustment to the PC.
4. Start-up the HCM5 PTZ CAMERA Service Tool.
5. Select Model No. BB-HCM580.
6. Power on the Set.
7. Execute browser (IE) and open the single camera page.
8. Adjust the set's lens as the same height as the collimator, and perform an image pickup of the inside of the collimator.
9. Press the "Video Adjustment" button.
10. After displaying “Please shoot the Light Box without chart” and adjust the position and zoom range without the Color Chart so
that the White image is displayed in the full screen.
11. Press the "OK" button.
12. Follow the message after displaying dialog.
13. After displaying "Please shoot Color Chart", set the Color Chart to HP light box. Adjust the position and zoom range so that
the Color Chart is displayed in the full screen and the target on the screen is placed in the center of each color, as shown in
the following Figure1.
14. Press the "OK" button.
15. When the adjustment completes with no error, the "Adjustment OK" is displayed.
16. When the adjustment comes out an error, the "Adjustment NG" is displayed.
16-1. When Security Warning window is displayed under the address bar, please execute next steps.
16-2. Click security warnig.
16-3. Permit the blocked contents.
16-4. In the case of "Adjustment NG", see SECTION 7.6 TROUBLESHOOTING.
Note:
Collimator must be inserted all the way into light box until reaching stop point.
• Viewing angle when taking the Color Chart
Figure1