Operating Instructions
[For assistance, please call: 1-800-272-7033] 77
2.13 Changing Authentication Setting and
Administrator User Name and Password
The Security: Administrator page allows you to change authentication,
administrator user name and password. The authentication window is displayed,
and allows the registered users to access the camera.
Notes
•
If you access the camera for the first time, the window to set administrator user
name and password is displayed. Make a note of the user name and password
so that you will not forget them.
•
The user name and password should be secured at your own responsibility.
Pay attention to the following points.
•
Set the user name and password as many characters as possible.
•
Change the password regularly.
IMPORTANT
•
It is important to limit access to the camera by use of a unique User Name and
a secret Password. Because the camera is accessed through the Internet it is
possible that the camera could be accessed by unknown individuals, including
those who are commonly known as "hackers," to whom you do not want to
allow access. The use of a unique User Name and a Password known only to
you will help insure that only authorized individuals are given access to the
camera. You have the option of proceeding without a User Name and
Password, but it is strongly recommended that you utilize these protections.
1.
Click [Administrator] on the Setup page.
2.
Set each parameter.
•
Clicking [Cancel] cancels your settings without saving changes.
