– 28 –
Installation
(Be sure to ask your dealer to install the unit.)
<When using anchors with an internal thread>
<For stand-alone installation>
<For installation on the ceiling>
The anchors must always be
installed.
Hexagon head bolt (M6)
Spring washer
Flat washer
The anchors must always be
installed.
Secure the underneath support
plate by tightening bolt.
Hexagon head bolt (M8)
Spring washer
Flat washer
OK example:
The unit is secured by holding its base
part.
NG example:
The unit is installed by holding its tilting
part.
NG
OK
Notes
p
Use a torque wrench whose torque can be specified to tighten the hexagon head bolts or nuts
at the torque levels listed in the table below.
After tightening the bolts, check for play.
Installing the pan-tilt head
Clamping torque
Hexagon head bolts or nuts (M6)
5.0 N
•
m (50 kgf
•
cm)
Hexagon head bolt (M8)
12.0 N
•
m (120 kgf
•
cm)
p
When installing the pan-tilt head, do not forcibly turn the “head” or “tilting arm” manually. Doing
so may result in malfunctioning.
