9. CCD Storage Time Setting
[Charge Time: Auto, OFF, 1/30s, 1/15s, 1/8s, 1/4s,
1/2s, 1s, 2s]
This is used to set the CCD storage time.
Auto:
ALC is performed followed by AGC and then
by the data storage, and the camera automatical-
ly adjusts the light quantity.
If “ON” is selected as the auto ND (ELC) setting
(
1
-
4
), ELC is performed followed by ALC, AGC
and then by the data storage in this order, and
the light quantity is automatically adjusted.
The electronic shutter setting (
5
-
2
) cannot be
changed.
OFF:
Under normal circumstances, this setting is
used.
1/30s to 2s:
Use this setting if it is not possible to
achieve a satisfactory video output even when
the gain up setting is used.
The auto ND (ELC) setting (
1
-
4
) and electronic
shutter setting (
5
-
2
) go “OFF” and cannot be
changed.
❈
If the images (CCD read out (mode) setting
(
5
-
4
)) have been set to “Fine”, 1/15s to 2s is
selected as the storage time setting, and the
sensitivity is set to about one-half of that
obtained with when they have been set to
“Normal”.
-36-
• Only 0 dB, 9 dB, or 18 dB can be selected in
case of using the RCU (RCB).
• 0 dB when the manual GAIN switch on the hybrid
control panel is at LOW, 9 dB when it is at MID, or
18 dB when it is at HIGH.
Notes
8. Digital Gain Up Setting
[Digital Gain Up: 0dB, 6dB, 12dB, 18dB, 24dB, 30dB]
This can be set only when “OFF” has been selected
as the auto gain up setting (
1
-
5
).
0 dB:
Under normal circumstances, this setting is
used.
6 dB to 30 dB:
Use this setting while shooting dark
scenes if it is not possible to achieve a satisfacto-
ry video output even when the lens diaphragm is
opened and “Night Eye” is selected as the manu-
al gain up setting (
1
-
7
).
Hybrid Control Panel
Manual GAIN Switch
