Panasonic AW-UE20KP, Инструкция по эксплуатации

Страница: 17 / 126

17
Use of easy-to-operate wireless remote control
(optional accessory) is possible

A wireless remote control capable of operating up to
four units can be used.
It can easily be used to set the various functions or
switch between them while viewing the menu
screens.
High degree of compatibility with Panasonic’s
currently available controllers, enabling a flexible
system to be put together

A maximum of five units can be operated by serial
control from one of Panasonic’s currently available
controllers (AW-RP60, AW-RP150).
The unit can also be used together with the cameras
and pan-tilt head unit systems currently available from
Panasonic Connect Co., Ltd. so that an existing system
can be used to advantage to put together a system that
is even more flexible.
[Note]

It may be necessary to upgrade the version of the
controller in order to support the unit.

The maximum distances between the units and
controller is 1000 meters (3280 ft). (when serial
control is exercised)
Use of an external device or some other means
must be provided separately in order to extend the
video signal connections.
PoE+ *1 eliminates need for camera power
configurations

Configurations for camera’s power supply are not
necessary when the unit is connected to a network
device that supports the PoE+ standard
(IEEE802.3at compliant)*2.
[Note]

If the AC adaptor and a PoE+ power supply are
connected simultaneously, the AC adaptor will
have priority.

Use a category 5e cable or higher when using
a PoE+ power supply.
The maximum length of the cable between the
power supply unit and the unit is 100 meters (328
ft). Using a cable that is lower than category 5e
may result in reduced power supply capabilities.
*1: Power over Ethernet Plus.
Referred to as “PoE+” in this manual.
*2: For details on PoE+ power supply devices for
which operation has been verified, consult
your local dealer.
Op