Panasonic AW-HS50N Скачать руководство пользователя страница 35

Страница: 35 / 125

3. Basic operations

Edge Type

[4] KEY Setup Menu
6.

Edge

Type

This item is used to add borders, shadows or other edges to
the key.

Off:

An edge is not added.

Border:

A border is added around the entire frame.

Drop:

A diagonal border is added.

Shadow:

A shadow is added.

Outline:

An outline (only a border with no fill) is added.

Border

Drop

Outline

Shadow

Edge Direction

[4] KEY Setup Menu

7. Edge Direction

This item is used to set the direction (in 45-degree
increments) in which to add “Drop” or “Shadow”.

225

180

270

135

315

(Top)

(Bottom)

(Right)

(Left)

Edge Width

[4] KEY Setup Menu
8.

Edge

Width

This item is used to set the edge width.

Set Edge Col

[4] KEY Setup Menu

9. Set Edge Col

This item is used to select any of the following colors for the
edges.

White, Yellow, Cyan, Green, Magenta, Red, Blue, Black

Adj Edge Col

[4] KEY Setup Menu

10. Adj Edge Col

This item is used to adjust the hue (H), saturation (S) and
luminance (L) of the color which has been set for the edges.

Содержание AW-HS50N






























































































































Результаты поиска

Содержание AW-HS50N

Отзывы:

Panasonic AW-HS50N, Руководство по эксплуатации, Страница: 35 / 125

Результаты поиска

Содержание AW-HS50N

Отзывы: