Preset Scope
Selected here are the setting items to be recalled when the contents
of the preset memory are regenerated.
Setting value:
Mode A
Pan, Tilt, Zoom (including digital zoom), Focus, Iris, Gain,
white balance adjustment value
Mode B
Pan, Tilt, Zoom (including digital zoom), Focus, Iris
Mode C
Pan, Tilt, Zoom (including digital zoom), Focus
Preset D-Extender
Select the digital extender function for when preset memory is recalled.
Setting value:
Off
Do not change the digital extender value when recalling the
preset.
On
Perform the operation to set the digital extender value from
the time of preset registration when recalling the preset.
Factory settings:
Off
Preset Zoom Mode
Select the zoom operation for when preset memory is recalled.
Setting value:
Mode A
Perform the zoom operation in line with the pan/tilt
operation.
Mode B
Perform the zoom operation quicker than the pan/tilt
operation.
Factory settings:
Mode A
Freeze During Preset
Turn the function for freezing images during preset playback off/on.
When this is set to [On], preset playback is performed with a still
of the image immediately preceding the start of preset playback
being output. The image freeze is released when preset playback is
finished.
Setting value:
Off
Do not freeze images during preset playback.
On
Freeze images during preset playback.
Limitation Setting
This establishes the up, down, left and right limit settings of the pan-
tilt head.
First, move the pan-tilt head to the position where the limit is to be
set, and press the corresponding button below to set the direction (up,
down, left or right) in which the limit is to be set.
After each setting has been selected, press the Set button to enter
the setting.
Tilt Up
Use this to save the current position as the upward limit.
Tilt Down
Use this to save the current position as the downward
limit.
Pan Left
Use this to save the current position as the leftward limit.
Pan Right
Use this to save the current position as the rightward limit.
Set/Release Use this to enable or disable the limit setting in each
direction.
z
System screen [System]
This menu has items that relate to the genlock phase adjustment and
camera’s output image settings.
z
z
Genlock
This item’s setting is reflected immediately.
Horizontal Phase
This is used to adjust the horizontal phase during genlock.
Setting range:
-206 to +49
Factory settings:
0
78
79
Web screen configurations (continued)
