Panasonic AW-HN130KP, Руководство по эксплуатации

Страница: 81 / 124

„ z
Output 1/3
This item’s setting is reflected when the [Set] button is pressed.
Format
The video format is changed on this screen.
For [480/59.94p(i)] and [576/50p(i)], P signals are output for HDMI,
while I signals are output for SDI and video outputs.
Setting value:
For 59.94Hz:
1080/59.94p, 1080/29.97p, 1080/23.98p, 1080/59.94i,
1080/29.97PsF, 1080/23.98PsF, 720/59.94p, 480/59.94p(i)
For 50Hz:
1080/50p, 1080/25p, 1080/50i, 180/25PsF, 720/50p, 576/50p(i)
Factory settings: 1080/59.94i
<NOTE>
• When you switch from an HD format to an SD format or vice versa,
the unit automatically restarts after the Format Set screen appears.
„ z
Output 2/3
This item’s setting is reflected when the [Set] button is pressed.
Frequency
This item is selected to switch the frame frequency.
Setting value:
59.94Hz / 50Hz
• When the frequency is switched, [Format] is set as follows.
59.94Hz 50Hz
1080/59.94p

1080/50p
1080/29.97p

1080/25p
1080/23.98p

1080/25p
1080/59.94i

1080/50i
1080/29.97PsF

1080/25PsF
1080/23.98PsF

1080/25PsF
720/59.94p  720/50p
480/59.94p(i)

576/50p(i)
Factory settings:
59.94Hz
„ z
Output 3/3
This item’s setting is reflected when the [Set] button is pressed.
Down CONV. Mode
The down-conversion mode is selected here.
Setting value:
Squeeze
Use this when the aspect ratio of the monitor is 16:9. When
the 4:3 aspect ratio has been set for the monitor screen, the
images are squeezed horizontally and extended vertically
changing the view of the angle.
SideCut
Use this when the aspect ratio of the monitor is 4:3. With
the vertical height serving as the reference, the parts which
extend beyond this at the two sides are cropped changing
the view of the angle.
LetterBox
Use this when the aspect ratio of the monitor is 4:3. With the
horizontal width serving as the reference, black bands are
added at the top and bottom changing the view of the angle.
Factory settings:
Squeeze
Color Bars Setup
This is only enabled when [Frequency] is set to [59.94Hz].
Select the color bar setup level (Off: 0.0IRE, On: 7.5IRE) for the
VIDEO OUT signal.
Setting value:
Off 0.0IRE
On 7.5IRE
Factory settings: Off
„ z
Others
This item’s setting is reflected when the [Set] button is pressed.
Install Position
“Desktop” or “Hanging” is selected here as the method used to install
the unit.
Setting value:
Desktop Stand-alone installation
Hanging Suspended installation
Factory settings:
Desktop
• When [Hanging] has been selected, the top, bottom, left and right
of the images will be reversed, and up/down/left/right control for
panning and tilting will also be reversed.
Smart Picture Flip
When this is set to [Auto] and the tilt becomes the angle set for
[Flip DetectAngle], the image will be flipped in the vertical direction
automatically.
Setting value:
Off Does not flip the image vertically.
Auto When the tilt becomes the angle set for [Flip DetectAngle], the
image will be flipped in the vertical direction automatically.
Factory settings: Off
Flip Detect Angle
Set the tilt angle at which the image will be flipped in the vertical
direction automatically when [Smart Picture Flip] is set to [Auto].
Setting range:
60° to 120°
Factory settings: 90°
Preset Speed Table
Set the preset speed table (Slow, Fast).
During preset playback, presets are performed at [Preset Speed] (1 to
30) values that are based on the table set here.
Setting value:
Slow / Fast
Factory settings: Fast
Preset Speed
Set the pan/tilt movement speed used when recalling camera
orientation information registered to the preset memory (30 steps).
Setting range:
1 to 30
Factory settings:
20
• When you set large [Preset Speed] values, the image may sway
when the movement stops.
• When [Preset Speed Table] is set to [Fast], [Preset Speed] values
equivalent to the AW-HE120 will be applied.
Preset Scope
Selected here are the setting items to be recalled when the contents
of the preset memory are regenerated.
Setting value:
Mode A
Pan, Tilt, Zoom (including digital zoom), Focus, Iris, Gain,
white balance adjustment value
Mode B Pan, Tilt, Zoom (including digital zoom), Focus, Iris
Mode C Pan, Tilt, Zoom (including digital zoom), Focus
Factory settings: Mode A
80 81
Web screen configurations (continued)