55
Camera menu items
(continued)
■
Output screen
### Output ###
Format
HDMI
1080/59.94i
SDI
1080/59.94i
Frequency
59.94Hz
Priority Mode
IP
Return
Format
HDMI, SDI
Format
Setting value
Frequency:
59.94Hz
Frequency:
50Hz
HDMI
Auto
1080/59.94p
1080/59.94i
1080/29.97PsF
1080/29.97p
720/59.94p
Auto
1080/50p
1080/50i
1080/25PsF
1080/25p
720/50p
SDI
1080/59.94p
1080/59.94i
1080/29.97PsF
1080/29.97p
720/59.94p
1080/50p
1080/50i
1080/25PsF
1080/25p
720/50p
The video format is changed on this screen.
For details on how to change the format, refer to
“Changing the format” (page 57).
●
The video signal of the SDI output may stop
temporarily when the HDMI cable is disconnected
and connected or the connected monitor is
replaced, for example.
Note
Simultaneous output according to video
format
●
Signals of the same video format are output from the
HDMI and SDI OUT connectors. (The setting values
in the menu will also change to match the format
configured later.)
●
When “HDMI” is set to “Auto”, the unit automatically
determines the output video resolution based on
information from the connected device. This will result
in the “SDI” setting changing to match the video
format of “HDMI”.
Frequency [59.94Hz, 50Hz]
This item is selected to switch the frame frequency.
●
When the frequency is switched, “Format” is set as
follows.
59.94Hz
50Hz
1080/59.94p
1080/50p
1080/59.94i
1080/50i
1080/29.97PsF
1080/25PsF
1080/29.97p
1080/25p
720/59.94p
720/50p
●
For details on how to change the frequency, see
“Changing the frequency” (page 57).
●
If you change the frequency, the unit will restart
automatically. Operation will not be possible while
the unit is restarting.
Some peripheral devices may not recognize that the
unit has restarted. If you change the frequency, be
sure to restart all peripheral devices.
Note
