68
Basic operations
Storing the settings in the memory (Store)
Images and operations to be registered can be set and then
registered in the memories.
STORE
DEL
VMEM
MACRO
EDIT
SHOT
MEM
BKGD
PATT
XPT
DSBL
TAKE
ENTER
7
NEW
8
COPY
9
PASTE
4
INS
5
DEL
6
MOD
1
<
2
>
3
REV
0/10
<<
.
>>
C
UNDO
CAM
PMEM
CAM
CONT
EVENT
MEM
KEY
PATT
-/+
PAGE
RE
CALL
MEMORY / WIPE PATTERN / 10 KEY
STILL 1
STILL 2
TRIM IN
REC
CLIP 1
CLIP 2
TRIM OUT
<
>
REV
<<
>>
TRIM OFF
PLAY
STOP
1
Using the unit, set the images or operations to be kept
in the memory.
To register event memory, refer to “
w
Creating a new
timeline” in “Editing event memory timelines”.
2
Press the [SHOT MEM] or [EVENT MEM] button of the
memory in which the images or operations are to be
registered.
Depending on the operation that was performed last,
the [STORE] button, [RECALL] button, [DEL] button or
[EDIT] button lights.
3
Select the bus (ME, DSK, AUX, CBGD, CLIP, MENU,
XPT or OTHER) to be registered in the memory.
From the Shot Memory menu (or Event Memory menu),
select the Target Select1/2 sub menu, and then select
“On”.
From the Macro menu, select the Store Select sub
menu, and then select “On”.
Refer to “Memory registration” and “Selecting the
buses whose settings are to be registered and or
played back”.
4
Press the [STORE] button.
The [STORE] button turns amber.
5
Press the
-/+
PAGE
button, and press the number key (1 to
10) corresponding to the page number.
6
Hold down (for 2 seconds or so) the number key (1 to
10) corresponding to the number of the memory to be
registered.
When the registration is completed, the number key
corresponding to the memory number lights in green.
p
The number keys whose indicators are lit in green
have memories already registered in them. Delete the
memory corresponding to the number key concerned,
and register the new memory.
7
Repeat the above steps to register other kinds of
settings in the memories.
