Live Switcher
Software Control Panel
©
Panasonic Corporation 2022
- 30 -
B
Macro memory editing buttons area
These buttons are used to edit the macro memory. The buttons are as follows.
1) Copy button: Stores the selected operation string in the buffer. The buffered operation string can
be pasted to the required place by using the below-mentioned Paste button.
2) Cut button: Deletes the selected operation string. However, the operation string itself is stored in
the buffer, so it can be pasted by using the Paste button.
3) Paste button: Pastes an operation string, stored in the buffer by the Copy or Cut button,
immediately before a selected operation string.
4) Insert button: Inserts an operation string immediately after a selected operation string. The below
operation strings can be selected.
5) Rec button: Records the macro memory. This is a toggle button, so clicking the Rec button again
will stop the recording. The Macro button in the Mode Selection area is lit red during recording.
6) Undo button: Undoes the edited operation content.
7) Redo button: Re-executes the edited operation content.
