Specifications
(As of December, 2011)
Power Requirement: AC 100 V to 240 V, 50 Hz/60 Hz, 88 W
Operating Temperature: 0 °C to 40 °C (32 °F to 104 °F)
Operating Humidity: 10 % to 90 % (no condensation)
Dimensions:
440 mm x 158 mm x 361 mm
(W x H x D)
(17-5/16 inches x 6-7/32 inches x 14-7/32 inches) excluding protrusions
Weight:
Approx. 6.2 kg (13.669 lb)
excluding accessory parts when no options have been installed
Approx. 6.6 kg (14.550 lb)
excluding accessory parts when all the possible options have been installed
Video Inputs (13 signal lines maximum):
Standard SDI: 8 signal lines, BNC x 8 (SDI INPUT 1 to SDI INPUT 8)
(The up-converter function can be used for the SDI INPUT 5 to
SDI INPUT 8 connectors.)
Standard DVI-D: 1 signal line, DVI-D x 1
Optional: Up to 4 additional signal lines (IN A1, IN A2, IN B1, IN B2)
(Up to two option boards can be installed in the two input/output slots.)
Video Outputs (10 signal lines, maximum):
Standard SDI: 5 signal lines, BNC x 6
(SDI OUTPUT 1 to SDI OUTPUT 5 x 1 line each, 2 distributed outputs for
SDI OUTPUT 1 only)
Standard DVI-D: 1 signal line, DVI-D x 1
Optional: Up to 4 additional lines (OUT A1, OUT A2, OUT B1, OUT B2)
• PGM, PVW, AUX1 to AUX4, MV (MULTI_VIEW), CLN, KEYOUT and
MEM PVW can be assigned to SDI OUTPUT 1 to SDI OUTPUT 5,
DVI-D OUT, OUT A1, OUT A2, OUT B1 and OUT B2.
• CLN can be pre-selected from KEY or DSK using a menu. (Up to
two option boards can be installed in the two input/output slots.)
Signal Formats:
SD: 480/59.94i, 576/50i
HD: 1080/59.94i, 1080/50i, 720/59.94p, 720/50p, 1080/24PsF*,
1080/23.98PsF*
*The following option boards are not supported: AV-HS04M1, AV-HS04M2,
AV-HS04M3, AV-HS04M4, AV-HS04M5, AV-HS04M6, AV-HS04M7
Signal Processing:
Y: P
B
: P
R
4: 2: 2, 10 bit (8 bit for video memory), RGB 4:4:4, 8 bit
ME Number:
1 ME
SDI Inputs:
HD-SDI: HD Serial digital (SMPTE 292M)
SD-SDI: SD Serial digital (SMPTE 259M)
8 signal lines, standard: IN1 to IN8
12 signal lines, maximum: IN A1, IN A2, IN B1, IN B2
(When two AV-HS04M1 boards are used; with active through)
HD: SMPTE 292M (BTA S-004B) standard complied with
• 0.8 V [p-p] ±10 % (75 Ω)
• Automatic equalizer More than 100 m (328 ft)
(when 1.5 Gbps/5C-FB cable is used)
SD: SMPTE 259M standard complied with
• 0.8 V [p-p] ±10 % (75 Ω)
• Automatic equalizer 200 m (656 ft) (when 5C-2V cable is used)
SDI Outputs:
HD-SDI: HD Serial digital (SMPTE 292M)
SD-SDI: SD Serial digital (SMPTE 259M)
5 signal lines, standard: OUT1 x 2; OUT2 to OUT5 x 1 each
9 signal lines, maximum: OUT A1, OUT A2, OUT B1, OUT B2
(When two AV-HS04M7 boards are used)
HD: SMPTE 292M (BTA S-004B) standard complied with
• Output level
0.8 V [p-p] ± 10 %
• Rise time
HD: Less than 270 ps
• Fall time
HD: Less than 270 ps
• Difference between rise time and fall time
HD: Less than 100 ps
• Alignment jitter
HD: Less than 0.2 UI (130 ps)
• Timing jitter
HD: Less than 1.0 UI
• Eye aperture ratio More than 90 %
• DC offset
0 ±0.5 V
SD: SMPTE 259M standard complied with
• Output level
0.8 V [p-p] ±10 %
• Rise time
Less than 1.5 ns
• Fall time
Less than 1.5 ns
• Difference between rise time and fall time
Less than 0.5 ns
• Jitter
Less than 0.2 UI
Composite Input:
Analog composite signal (NTSC/PAL) (1.0 V [p-p], 75 Ω)
(Option board)
4 signal lines, maximum: IN A1, IN A2, IN B1, IN B2
(When two AV-HS04M6 boards are used; with loop-through)
Analog Input:
SD/HD analog component Y/P
B
/P
R
(1.0 V [p-p], 75 Ω)
(Option board)
4 signal lines, maximum: IN A1, IN A2, IN B1, IN B2
(When two AV-HS04M2 boards are used)
Analog Output:
SD/HD analog component Y/P
B
/P
R
(1.0 V [p-p], 75 Ω)
(Option board)
4 signal lines, maximum: OUT A1, OUT A2, OUT B1, OUT B2
(When two AV-HS04M4 boards are used)
• 2 signal lines (OUT A1, OUT B1) when two AV-HS04M5 boards are used.
DVI-I Input:
Analog/digital RGB:
(Option board)
XGA (1024
x
768), WXGA (1280
x
768), SXGA (1280
x
1024)
Vertical frequency: 60 Hz
• This connector does not support the HDCP technologies.
4 signal lines, maximum: IN A1, IN A2, IN B1, IN B2
(When two AV-HS04M3 boards are used)
DVI-I Output:
Analog/digital RGB:
(Option board)
XGA (1024 x 768), WXGA (1280 x 768), SXGA (1280 x 1024),
WSXGA+* (1680 x 1050), UXGA* (1600 x 1200), WUXGA* (1920 x 1200)
* Selectable only when digital signals are output.
Vertical frequency: 60 Hz
• This connector does not support the HDCP technologies.
2 signal lines, maximum: OUT A2, OUT B2
(When two AV-HS04M5 boards are used)
DVI-D Input:
Digital RGB:
(Option board)
XGA (1024 x 768), WXGA (1280 x 768), SXGA (1280 x 1024),
WSXGA+ (1680 x 1050), UXGA (1600 x 1200), WUXGA (1920 x 1200)
Vertical frequency: 60 Hz
Digital RGB: 1080/50p, 1080/59.94p
• Analog input signals are not supported.
• This connector does not support the HDCP technologies.
4 signal lines, maximum: IN A1, IN A2, IN B1, IN B2
(When two AV-HS04M8 boards are used)
• The DVI-I connector cable cannot be used.
• For the DVI-D connector cable, use a cable with a length of up to
5 m (16.4 ft).
DVI-D Input/Output: Digital RGB:
XGA (1024 x 768), WXGA (1280 x 768), SXGA (1280 x 1024),
WSXGA+ (1680 x 1050), UXGA (1600 x 1200), WUXGA (1920 x 1200)
Vertical frequency: 60 Hz
Video format inputs:
Digital RGB: 1080/50p, 1080/59.94p
Vertical frequency: Same as system formats
Video format outputs:
Digital RGB: 1080/50p, 1080/59.94p, 1080/50i, 1080/59.94i,
720/50p, 720/59.94p
• The input and output of analog signals are not supported.
• Output support the high-resolution multi view mode:
Signals are output with a high resolution even when SD is set as the
system mode. (When high-resolution multi view mode has been
enabled, MV is selected as the DVI-D OUT output, and it is not
possible to select MV with SDI OUT.)
• This connector does not support the HDCP technologies.
Standard input/output: 1 line each (DVI-D IN, DVI-D OUT)
• The DVI-I connector cable cannot be used.
• For the DVI-D connector cable, use a cable with a length of up to
5 m (16.4 ft).
Reference
In GENLOCK mode: Black burst or Tri-level Sync input signals
Input/Output:
(with loop-through)
In internal sync mode: Black burst output signals x 2
• Same field frequencies as those of the system formats supported.
• With the 1080/24PsF format, only GENLOCK mode supported.
• With the 1080/23.98PsF format, black burst with 10F-ID
(SMPTE318M standard met) or TRI signals supported.
Video Delay Time:
1 line (H), When the frame synchronizer setting is “Off” and the
up-converter setting is “Off”.
1 frame (F), When the frame synchronizer setting is “On” or the
up-converter setting is “On”.
• When the signals have passed through PinP, DVE, multi view,
down-converter, DVI-IN or DVI-OUT, a maximum delay of 1 frame is
applied in each case.
Control I/O (LAN):
RJ-45
LAN 10BASE-T/100BASE-TX (For IP control)
Connecting cable: LAN cable (category 5 or above), max. 100 m
[328 ft], STP (Shielded Twisted Pair) cable recommended
• When connecting to a hub (switching hub), use a straight cable.
Use a crossover cable when connecting the unit and computer on a
1:1 basis without going through a hub.
• Use with the same segment is recommended for the equipment
which is connected to the unit. If the unit is connected to
equipment whose segments are different, events dependent upon
the settings inherent to the network equipment, for instance, may
occur so thoroughly check the connections with the equipment to
which the unit will be connected prior to the start of operation.
Control I/O (EDITOR): D-sub, 9-pin, female
EDITOR Used to control an editor
RS-422 control connector
Communication format
Baud rate: 38400 bps, Character length: 8 bit, Parity: Odd
Stop bit: 1 bit, Flow control: None
Control I/O (COM): D-sub, 9-pin, female
COM Used to control an external device RS-422 control connector
Communication format (selected using a menu)
• Mode: 1 (default setting), Baud rate: 9600 bps, Character length: 8 bit
Parity: None, Stop bit: 1 bit, Flow control: None
• Mode: 2, Baud rate: 38400 bps, Character length: 8 bit, Parity: Odd
Stop bit: 1 bit, Flow control: None
• Mode: 3, Baud rate: 38400 bps,Character length: 8 bit,Parity: None
Stop bit: 1 bit, Flow control: None
Control I/O:
D-sub, 15-pin, female ( x 2)
(TALLY/GPI 1
Input: 8 inputs, general-purpose, photocoupler sensing
TALLY/GPI 2)
Output: 19 outputs; selected from R/G tally, general-purpose
Alarm: 1 output, open collector output (negative logic)
Other:
BOOT switch [SV/NM (service/normal) ] (for maintenance purposes)
Normally, this switch is used as the “NM” position.
