10 (E)
ENGLISH
Mounting
Checking that the board has been mounted correctly
Turn on the power of the AV-HS400N/E, and use the menu used to display the statuses of
the option boards to check that the board has been mounted correctly.
Press the [FUNC] button to light its indicator, and press the [SYSTEM] button to
display the SYSTEM menu.
Turn [F1] to display the OptVer sub menu.
<Menu display>
OptVer Select Board
Version
14/14 IN-SL1 DVI
Turn [F2] to select the option slot (IN-SL1 or IN-SL2) using the Select item.
If the board has been mounted correctly, “DVI” will appear at the Board item.
If it has not been mounted correctly, “None” will appear at the Board item.
For details on the input signal settings and operating methods, refer to the operating
instructions of the AV-HS400N/E.
4-3. Setting the DVI input signals
5-2. Setting the crosspoints
Removal procedure
Remove this board by following the procedures for mounting it in reverse.
01.AV-HS04M3̲English.indd Sec1:10
01.AV-HS04M3̲English.indd Sec1:10
2007/10/01 18:32:42
2007/10/01 18:32:42
