2
Read this first!
Read this first!
indicates safety information.
WARNING:
f
To reduce the risk of fire, do not expose
this equipment to rain or moisture.
f
To reduce the risk of fire, keep this
equipment away from all liquids. Use
and store only in locations which are
not exposed to the risk of dripping or
splashing liquids, and do not place any
liquid containers on top of the equipment.
CAUTION:
Do not remove panel covers by
unscrewing.
No user serviceable parts inside. Refer
servicing to qualified service personnel.
CAUTION:
To reduce the risk of fire and annoying
interference, use the recommended
accessories only.
CAUTION:
In order to maintain adequate ventilation,
do not install or place this unit in a
bookcase, built-in cabinet or any other
confined space. To prevent risk of electric
shock or fire hazard due to overheating,
ensure that curtains and any other
materials do not obstruct the ventilation.
CAUTION:
Do not leave the unit in direct contact with
the skin for long periods of time when in use.
Low temperature burn injuries may be
suffered if the high temperature parts of this
unit are in direct contact with the skin for
long periods of time.
When using the equipment for long periods
of time, make use of the tripod.
FCC NOTICE (USA)
This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a residential installation. This equipment
generates, uses and can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation. If
this equipment does cause harmful interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
f
Reorient or relocate the receiving antenna.
f
Increase the separation between the equipment and receiver.
f
Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected.
f
Consult the dealer or an experienced radio/TV technician for help.
The user may find the booklet “Something About Interference” available from FCC local
regional offices helpful.
Warning:
To assure continued FCC emission limit compliance, follow the attached installation
instructions and the user must use only shielded interface cables when connecting to host
computer or peripheral devices. Also, any unauthorized changes or modifications to this
equipment could void the user’s authority to operate this device.
NOTIFICATION (Canada)
CAN ICES-3(B)/NMB-3(B)
