Panasonic AU-V35LT1G, Руководство по эксплуатации

Страница: 189 / 214

– 189 –
Chapter 11 Network Connection — Preparing for connection
Preparing for connection
For wireless module AJ-WM30/AJ-WM50
Attach the wireless module AJ-WM30/AJ-WM50 (optional) to the camera.
Fig. 1 Fig. 2
Fig. 3
Fig. 4
Wireless module fixing part
Wireless module fixing part
1
Open the cover. (Fig. 1)
2
Remove the wireless module fixing part from the camera. (Fig. 2)
The wireless module fixing part is fixed with one screw.
3
Securely attach the wireless module to the <USB HOST> terminal (sub host). (Fig. 3)
4
(AJ-WM50 only) Place the module holder under the wireless module. (Fig. 4)
Attach the cap for the wireless module on the hole of the module holder.
5
Fix the wireless module fixing part removed in Step 2 with a screw. (Fig. 4)
6
Close the cover.
@ @
NOTE
t
When removing the wireless module, pull it down straight.
t
When connected with the wireless LAN, attach the wireless module securely and close the cover.
t
When using a wireless module other than AJ-WM30/AJ-WM50, refer to “For wireless module other than AJ-WM30/AJ-WM50” (page 190).
Cautions when using wireless module AJ-WM30/AJ-WM50
Read the operating manual of the wireless module thoroughly and understand it before using.
For the latest information, visit the following website:
http://pro-av.panasonic.net/