Panasonic ANUJ3000, Руководство пользователя

Страница: 53 / 69

External control
43
2) “Replacement time (×100hrs)”… To set the LED replacement time
(* While changing replacement time settings, “Replacement time (×100hrs)” is highlighted.
・
Read Reads the current replacement time setting from the UJ35 controller into the PC.
・
Write Uploads the current replacement setting from the PC to the UJ35 controller.
・
Cancel
Cancels the current replacement time setting operation and reverts to the original settings.
5. Using the Type Set screen
… For particular Type 0-7), select the CH.
… For particular Type (0-7), enter the program settings (STEP (%, s) for particular CH (1-4).
*When new CH settings are being entered, Type Change is highlighted.
Lower graph: orange bar, irradiation enabled timing; gray bar, irradiation disabled timing
・
[TYPE(0-7)] Selects particular TYPE (0–7) for setting and read out.
・
[CH(1-4)] Selects particular TYPE CH (1–4) for setting and read out.
・
[UV.PWR(0-100)]
For each STEP (1–10) enter UV strength (0%–100%) or display values read from UJ35 controller.
・
[TIME(0.0-999, CON)]
For each STEP (1–10) enter irradiation time (0–999 s, CON) or display values read from UJ35 controller.
・
Copy Copies settings for STEP 1–10.
・
Paste Pastes copied settings for STEP 1–10.
・
Read Reads the current TYPE CH (CH1 only) settings from the UJ35 controller.
・
Write
Uploads current TYPE CH (CH1 only) settings and CH selection from computer to UJ35 controller.
・
Cancel Cancels current setting entry operation and return to start.