Panasonic AKW1110, Руководство пользователя

Страница: 25 / 60

KW1M Eco
－
POWER METER
17
Preset value setting mode
Enter preset value to output using
<ITEM/
△
><SHIFT/
▽
>
.
( 0
～
999999)
*It is only when “Cnt” is selected on unit for pulse output
setting mode.
→
<SET>
Electricity charge setting mode Conversion factor setting mode
Enter the rate per 1kWh using
<ITEM/
△
><SHIFT/
▽
>
.
Enter the conversion factor per 1kWh
using
<ITEM/
△
><SHIFT/
▽
>
.
(0.00
～
99.99
Initial: 10.00)
→
<SET>
(0.000
～
9.999
Initial: 0.410)
↓
<SET>
Monitor
4.3.2 MODE2
＊ Only AKW1111 (400VAC applicable type)
(Mode for setting of each parameter for pulse measurement)
Max. counting speed setting mode Hz
Mode defines max. counting speed.
・
Select from 2kHz/30Hz
Pre-scale setting mode PSCL
Mode defines pre-scale value used for changing count value.
・
It can be set the range of 0.001 to 100.000. (Initial 1.000)
・
The position of decimal point set with this mode is applied to count value and preset value.
ex) When 0.01 (Last 2-digit) is set, the decimal point of count value and preset value has 2 digit
under decimal point.
Mode2 Setting flow chart
Monitor
↓
<MODE> (MODE 2 Lighting)
↓
<SET>
Max. counting speed setting mode
Press <ITEM/
△
><SHIFT/
▽
>
to change max counting speed.
Max. counting speed is selected from 2000(2kHz) ⇔ 30 （ 30Hz ） .
→
<SET>
2000(2kHz) 30(30Hz)
Pre-scale setting mode
Enter pre-scale value using
<ITEM/
△
><SHIFT/
▽
>
.
→
<SET>
Monitor
(0.001 ～ 100.000, initial 1.000)
＊
The decimal point set with this
mode is applied to count value and
preset value.