Panasonic AK-HCU250P Скачать руководство пользователя страница 20

Страница: 20 / 66

Parts and their functions

Rear panel 1

1 [HD SDI OUT] connectors [1] to

[3]

These connectors (BNC) are for outputting 3G/1.5G-SDI signals.

Signals output can be selected from the CCU menu.

● Connect with a 5C-FB cable or better.

2 [HD SDI OUT] connector

[4/PM]

These connectors (BNC) are for outputting 1.5G-SDI signals.

This output is specifically for the picture monitor.

● Connect with a 5C-FB cable or better.

3 [HD SDI PROMPT IN] and [HD

SDI PROMPT OUT] connectors

These connectors (BNC) are for inputting 3G/1.5G-SDI prompter signals.

An active through signal is output from the [HD SDI PROMPT OUT] connector.

● 1080/59.94p/50p/59.94i/50i video formats can be input.

● Connect with a 5C-FB cable or better.

4 [HD TRUNK OUT] connector

The 3G/1.5G HD SDI TRUNK signals that are input to the camera are output.

5 [RET1 IN] to [RET2 IN]

connectors

These connectors (BNC) are for inputting SDI signals for return images in HDTV formats.

3G and 1.5G are recognized automatically.

● Connect with a 5C-FB cable or better.

6 [ANALOG PROMPT IN] and

[ANALOG PROMPT

OUT]

connectors

This connector (BNC) is for inputting SD analog composite signals for the prompter.

When a cable is not connected to ANALOG PROMPT OUT, the connector is automatically

terminated at 75 Ω. Connecting a cable to this connector releases 75 Ω termination.

7 [REF] connector

These connectors (BNC) are for inputting reference signals.

Black burst (BB) signals and tri-level sync signals can be input, and the type of signals input is

recognized automatically.*

When no cable is connected to the loop-through output connector (B), the connector is

automatically terminated at 75 Ω.

Connecting a cable to this connector releases 75 Ω termination.

When a cable is connected to the loop-through output connector (B), be sure to connect the

other end of the cable to a connector.

A. Reference signal input connector

B. Loop-through output

*1: When the [CCU MODE] is [1080/23.98psF], input 1080/23.98psF (47.95 Hz) tri-level sync

signals.

For details on supported sync signals for each format, see "G/L specifications."

“G/L specifications” (see page 59)

Содержание AK-HCU250P



































































Результаты поиска

Содержание AK-HCU250P

Отзывы:

Бренды по названию

Популярные бренды

Panasonic AK-HCU250P, Руководство по эксплуатации

Результаты поиска

Содержание AK-HCU250P

Отзывы:

Бренды по названию

Популярные бренды