Panasonic AK-HC5000G, Руководство по эксплуатации

Страница: 61 / 110

– 61 –
Chapter 4 Menu Operations — Menu list
[DRS]
Item Description of settings
[DRS] Enables/disables the dynamic range stretcher function. Set this to [ON] to automatically adjust the
contrast.
This cannot be set in HDR mode.
[OFF], [ON]
f
Factory setting: [OFF]
[EFFECT DEPTH] Sets the compression level of the high-luminance areas of the dynamic range stretcher function. Set a
larger value to increase the compression level of the high-luminance areas.
[1]…[5]
f
Factory setting: [5]
[DETAIL SETTING]
Item Description of settings
[DETAIL] Enables/disables all detail functions.
[OFF], [ON]
f
Factory setting: [ON]
[MASTER DETAIL] Sets the master detail.
[ − 31]…[ + 31]
f
Factory setting: [0]
[H DETAIL LEVEL] Sets the correction level of the horizontal detail.
[00]…[63]
f
Factory setting: [15]
[V DETAIL LEVEL] Sets the correction level of the vertical detail.
[00]…[63]
f
Factory setting: [20]
[PEAK FREQUENCY] Sets the peak frequency of the horizontal detail.
[12.4MHz], [12.5MHz], [12.7MHz], [12.9MHz], [13.0MHz], [13.3MHz], [13.6MHz], [13.9MHz], [14.2MHz],
[14.6MHz], [15.0MHz], [15.5MHz], [16.1MHz], [16.7MHz], [17.3MHz], [18.3MHz], [18.6MHz], [18.8MHz],
[19.0MHz], [19.2MHz], [19.5MHz], [19.9MHz], [20.3MHz], [20.9MHz], [21.5MHz], [22.4MHz], [23.6MHz],
[25.4MHz], [28.6MHz], [37.1MHz]
f
Factory setting: [19.0MHz]
[V DETAIL FREQUENCY] Sets the vertical detail frequency.
[00]…[31]
f
Factory setting: [18]
[CRISP] Sets the detail signal noise removal level.
[00]…[63]
f
Factory setting: [0]
[DETAIL GAIN( + )] Sets the detail level in the + (upward) direction.
[ − 31]…[ + 31]
f
Factory setting: [0]
[DETAIL GAIN( − )] Sets the detail level in the − (downward) direction.
[ − 31]…[ + 31]
f
Factory setting: [0]
[DETAIL CLIP + ] Adjust the detail clip to reduce glare produced by an excess of details.
[00]…[63]
f
Factory setting: [0]
[DETAIL CLIP − ] Adjusts the length of the undershoot of the detail edge component.
[00]…[63]
f
Factory setting: [0]
[DETAIL SOURCE] Sets the RGB signal component ratio to create the detail.
[(G
+
R)/2], [(G
+
B)/2], [(2G
+
B
+
R)/4], [(3G
+
R)/4], [R], [G]
f
Factory setting: [(G + R)/2]
[KNEE APERTURE LEVEL] Adjusts the knee aperture level.
This cannot be set in HDR mode.
[00]…[39]
f
Factory setting: [5]
[DETAIL KNEE] Adjusts the detail components of knee.
[00]…[15]
f
Factory setting: [0]
[LEVEL DEPENDENT SWITCH] Enables/disables the function to remove details of dark areas.
This cannot be set in HDR mode.
[OFF], [ON]
f
Factory setting: [OFF]
[LEVEL DEPENDENT] Sets the level to remove details of dark areas.
[00]…[15]
f
Factory setting: [8]
[DARK DETAIL SWITCH] Enables/disables the function to emphasize details of dark areas.
This cannot be set in HDR mode.
[OFF], [ON]
f
Factory setting: [OFF]