Panasonic AK-HC3900G Скачать руководство пользователя страница 22

Страница: 22 / 82

– 22 –

Chapter 2 Description of Parts — Rear side

12 <LEVEL> dial (<INTERCOM>)

Used to adjust the volume level of the intercom when the mixing function of the intercom connected to the <INTERCOM> terminal and the PGM

is enabled. The mixing function of the intercom and the PGM can be enabled/disabled from [MAIN MENU]

→

[INTERCOM SETTING]

→

[INCOM

RECEIVE SETTING]

→

[PGM MIX].

<HD SDI1> terminal (BNC)

[CAM]:

Outputs camera images.

[HD PROMPT]:

Outputs HD prompter video images.

Configure the output images in [MAIN MENU]

→

[IN/OUT SELECT]

→

[HD-SDI1 OUT].

NOTE

•

Use a cable that is 5C-FB or above.

•

[HD PROMPT] can be selected only when the camera is connected to the CCU.

Please also note that the video formats available for output are 1080/59.94p/50p/59.94i/50i.

<HD SDI2> terminal (BNC)

[CAM]:

Outputs camera images.

[VF]:

Outputs viewfinder images.

[RET]:

Outputs return images.

[RET1]/[RET2]:

Outputs the selected images.

Configure the output images in [MAIN MENU]

→

[IN/OUT SELECT]

→

[HD-SDI2 OUT].

NOTE

•

Use a cable that is 5C-FB or above.

•

[RET] and [RET1]/[RET2] can be selected only when the camera is connected to the CCU.

<AUX> terminal

This is the external device connecting terminal.

[PMT OUT]:

Outputs prompter video images.

[HD TRUNK]:

HD trunk input

Set this from [MAIN MENU]

→

[IN/OUT SELECT]

→

[AUX I/O].

NOTE

•

Use a cable that is 5C-FB or above.

•

The video formats available for input to [HD TRUNK] are 1080/59.94p/50p/59.94i/50i.

16 <DC IN> terminal

This is an input terminal for the external DC power supply. Connect an external DC power supply to this terminal. (DC 10.8 V to 17 V)

<MIC 2> terminal

Used to connect audio equipment or a microphone.

The power for the microphone is supplied via this terminal, enabling use of a phantom powered (48 V) microphone. Turn the power off when

connecting a microphone, and then configure the settings to suit the microphone after connecting the microphone.

Содержание AK-HC3900G



















































































Результаты поиска

Содержание AK-HC3900G

Отзывы:

Похожие инструкции для AK-HC3900G

Бренды по названию

Популярные бренды

Panasonic AK-HC3900G, Руководство по эксплуатации

Результаты поиска

Содержание AK-HC3900G

Отзывы:

Похожие инструкции для AK-HC3900G

Бренды по названию

Популярные бренды