![Panasonic AJUFC1800 - HD STANDARDS CONVERT Скачать руководство пользователя страница 27](http://html.mh-extra.com/html/panasonic/ajufc1800-hd-standards-convert/ajufc1800-hd-standards-convert_system-reference-manual_272037027.webp)
27
AUD
-6
CH 5/6 AUDIO CRC ERROR
A checksum error was found
on the external audio signal.
Check cable and/or source.
AUD
-7
CH 7/8 AUDIO PARITY
ERROR
A parity error was found on
the external audio signal.
Check cable and/or source.
AUD
-8
CH 7/8 AUDIO CRC ERROR
A checksum error was found
on the external audio signal.
Check cable and/or source.
SYS
-1
FAN STOPPED
The rear panel cooling fan
has stopped.
Check for obstruction.
MM-
1
NO EXT SYNC
Reference is external sync,
but no signal is detected.
Check EXT SYNC input.
MM-
2
NO SMPTE 318 SYNC
Reference is SMPTE 318, but
signal is incorrect.
Connect a SMPTE 318 signal
to EXT SYNC.
MM-
3
NO INPUT LOCK
Input PLL is not locked.
Make sure that input source
matches the selected format.
MM-
4
NO OUTPUT LOCK
Output PLL is not locked.
Input source must be locked
to the external reference.
Others
INDICATORS
L1 PCB LED
D3 - D0 LED (Red): These LEDs show the input frame rate. See table:
LED
Status
1125i
1125p
750p
525i
525p
625i
0000
30
30
60
30
60
0001
29.97
29.97
59.94
29.97
29.94
0010
24
24
24
0011
23.98
23.98
23.98
0100
25
25
50
0101
25
0110
30
30
24
D3 - D0
0111
29.97
39.97
23.98
Note: 1 is on, 0 is off.
CRC LED (Green): When CRC errors are not present, the LED is lit.
L2 PCB LED
D3 LED (Red): Processor error.
D4 LED (Green): Flashes when the system microprocessor is running.