40
309
EDIT RPLCEC
The same type of setting as setup menu No.
305. This selects the channel concerned when
the CUE edit preset is set in compliance with
the ON or OFF presetting for the analog audio
signals designated by the controller.
0000
N-DEF :
Not set.
0001
CH1 :
Compliance with analog CH1 edit preset.
0002
CH2 :
Compliance with analog CH2 edit preset.
0003
CH1+2 :
Compliance with either analog CH1 or CH2
edit preset.
310
CONFI EDIT
This selects whether to conduct simultaneous
playback while editing is in progress.
0000
OFF :
No simultaneous playback
0001
ON :
Simultaneous playback
<Note>
Simultaneous playback is valid when the MODE
switch is set to TAPE.
Setup menus
The underlined items indicates the initial setting.
USER menu
<EDIT>
No./Item
Description
301
IN/OUT DEL
This selects the operation to be performed
when an edit point has been set incorrectly
(when the OUT point is before the IN point).
0000
MANU :
Editing is not executed unless the illegal edit
point is cleared or set again properly.
0001
AUTO :
The edit points already input are automatically
cleared.
303
STD/
NON-STD
This selects STD or NON-STD in accordance
with the composite input signal.
0000
AUTO :
Standard/non-standard signals are
automatically identified and processed.
0001
STD :
Standard signals are processed. (Forced STD)
0002
N-STD :
Non-standard signals are processed. (Forced
NON-STD)
<Note>
Use the non-standard (N-STD) setting when
video or audio trouble occurs with signals from
laser discs or a satellite.
304
SERVO REF
This selects the video signal processing.
0000
AUTO :
Servo is synchronized with the input signal
during recording and editing, or with the REF
signal during playback.
0001
EXT :
Servo is synchronized at all times with the REF
signal.
305
EDIT RPLCE1
This sets the channel assignments for the
controller’s analog audio preset when editing
the digital audio of the VTR using a controller
which does not have a digital audio edit
preset control function.
This selects the channel concerned when the
VTR CH1 edit preset is set in compliance with
the ON or OFF presetting for the analog audio
signals designated by the controller.
0000
N-DEF :
Not set.
0001
CH1 :
Compliance with analog CH1 edit preset.
0002
CH2 :
Compliance with analog CH2 edit preset.
0003
CH1+2 :
Compliance with either analog CH1 or CH2
edit preset.
306
EDIT RPLCE2
The same type of setting as setup menu No.
305. This selects the channel concerned when
the CH2 edit preset is set in compliance with
the ON or OFF presetting for the analog audio
signals designated by the controller.
0000
N-DEF :
Not set.
0001
CH1 :
Compliance with analog CH1 edit preset.
0002
CH2 :
Compliance with analog CH2 edit preset.
0003
CH1+2 :
Compliance with either analog CH1 or CH2
edit preset.
No./Item
Description
