manualshive.com logo in svg

Panasonic AJHD150P - DIGITAL HD RECORDER, Руководство по эксплуатации, Страница: 95 / 122

Поделиться
Скачать
Panasonic AJHD150P - DIGITAL HD RECORDER Скачать руководство пользователя страница 95

– 95 –

Setup menus

USER menu

<AUDIO>

 (continued)

Item

Setting

No.

Superimposed

No.

Superimposed

Description

display

display

742

CH6 CUE

0000

          OFF

SEL

0001

ON

743

CH7 CUE

0000

          OFF

SEL

0001

ON

744

CH8 CUE

0000

          OFF

SEL

0001

ON

745

MONI CH

 0000

      MANU

SEL

0001

AUTO1

0002

AUTO2

0003

AUTO11

0004

AUTO21

746

MON AUTO

0000

           L/R

SEL

0001

L

0002

R

747

MONI SEL

0000

         OFF

INH

0001

ON

0002

ON1

The underline on the setting item denotes the initial setting.

This selects whether the CUE signal is to be output to the
main line of CH6 in the search mode.
0: The CUE signal is not output.
1: The CUE signal is output.

<Note>

CUE output signal selection is effective only when any setting
other than MANU has been selected for setup menu No. 745
(MONI CH SEL), and either L/R or R has been selected for
setup menu No. 746 (MON AUTO SEL).

This selects whether the CUE signal is to be output to the
main line of CH7 in the search mode.
0: The CUE signal is not output.
1: The CUE signal is output.

<Note>

CUE output signal selection is effective only when any setting
other than MANU has been selected for setup menu No. 745
(MONI CH SEL), and either L/R or L has been selected for
setup menu No. 746 (MON AUTO SEL).

This selects whether the CUE signal is to be output to the
main line of CH8 in the search mode.
0: The CUE signal is not output.
1: The CUE signal is output.

<Note>

CUE output signal selection is effective only when any setting
other than MANU has been selected for setup menu No. 745
(MONI CH SEL), and either L/R or R has been selected for
setup menu No. 746 (MON AUTO SEL).

This selects  the monitor output.
0: The output is as selected in MONITOR SELECT.
1: The cue signal is automatically output in all tape modes

except that PCM AUDIO is output over the –1 to +1 range.

2: The cue signal is automatically output in all tape modes

except in the play mode in which PCM AUDIO is output.

3: In addition to AUTO1, the CUE input signal is auto-

matically output when the REC button is pressed to switch
the unit to EE mode after setup menu item No. 746 (MON
AUTO SEL) is set to L/R.

4: In addition to AUTO2, the CUE input signal is auto-

matically output when the REC button is pressed to switch
the unit to EE mode after setup menu item No. 746 (MON
AUTO SEL) is set to L/R.

If a setting other than MANU has been selected for setup
menu item No.745 (MONI CH SEL), the CUE signal is
automatically sent to the monitor output in accordance with
the operation mode but this item selects the monitor channel
which will be automatically switched to CUE.
0: The CUE signal is output to both the left and right channels.
1: The CUE signal is output to the left channel only.
2: The CUE signal is output to the right channel only.

This selects whether to enable or disable the MONITOR
SELECT button on the front panel.
0: The button’s operation is enabled.
1: The button’s operation is disabled.
2: In the FULL display mode, the button’s operation is

disabled; operation is enabled in the FINE display mode
only.

Содержание AJHD150P - DIGITAL HD RECORDER



























































































































Отзывы:

Нет отзывов