E-6
ENG
L
IS
H
Proxy configuration
Configuration menu
To record proxy data with the P2 cam, perform
configuration on the <PROXY SETTING> screen
in the SYSTEM SETTING page of the
configuration menu.
When this board is installed in the P2 cam, the
following configuration menu items are enabled.
PROXY SETTING screen
is the factory setting mode.
z
Proxy data cannot be recorded in the following
modes even if the REC MEDIA item is set to
“P2” or “P2&SD”.
INTERVAL REC (including ONE SHOT REC)
LOOP REC
z
In ONE CLIP REC mode, when a clip can be
recorded combined with the previous clip (when
“1
¢
CLIP” is displayed), the proxy function
cannot be set. Close the menu once, hold down
the STOP button for about 2 seconds to end
clip consolidation, and try again.
z
Changes may occur to the PROXY SETTING
menu when using a P2 camera with this board
loaded to read SD memory card data written
from the <SD CARD READ/WRITE> screen of
the FILE page in the SETTING MENU of a P2
camera that does not have this board loaded.
Item/
Data
storage
Variable
range
Remarks
REC MEDIA
OFF
P2
P2&SD
Select media for proxy data
recording.
OFF:
No proxy data is
recorded.
P2:
Proxy data is
recorded on the P2
card.
P2&SD:
Proxy data is
recorded on both the
P2 card and the SD
memory card.
- C U F -
REC MODE
(HD)
STD 2CH MP4
LOW 2CH MOV
HQ 2CH MOV
HQ 4CH MOV
SHQ 2CH MOV
Specify the recording mode
of proxy data recording. (HD
mode only)
For details of each mode,
see "
Recording modes and
recording signals (video
and audio)" (page 7).
- C U F -
REC MODE
(SD)
STD 2CH MP4
LOW 2CH MOV
Specify the recording mode
of proxy data recording. (SD
mode only)
For details of each mode,
see "
Recording modes and
recording signals (video
and audio)" (page 7).
- C U F -
TC SUPER
OFF
UPPER
LOWER
Specify an option for
superimposing the time
code display on the video
recorded as proxy data.
OFF:
Time code display is
not superimposed on
the recorded video.
UPPER:
Time code display is
superimposed on the
upper area of the
recorded video.
LOWER:
Time code display is
superimposed on the
lower area of the
recorded video.
- C U F -
Item/
Data
storage
Variable
range
Remarks
PROXY DISP
OFF
ON
Select whether to display a
message on the Viewfinder
and the LCD monitor when
starting proxy data
recording.
OFF:
No message is
displayed.
ON:
A message is
displayed.
<Notes>
z
It is also displayed on VF
INDICATOR screen.
z
Write/read cannot be done
on the SD Memory Cards
unless VF MENU R/W item
is set to ON in the <SD
CARD R/W SELECT>
screen of FILE page.
- C U F R
STREAMING
MODE
OFF
RTP
HTTP
Selects the mode for the
streaming function.
OFF:
Stops the streaming
function.
RTP:
Selects RTP mode.
HTTP:
Selects HTTP live
streaming mode.
<Note>
This is displayed only when
the wireless LAN function is
enabled. For further details,
refer to the User Guide of
the Wireless LAN Upgrade
Software Key
(AJ-SFU3100G, optional).
- C U F -
AJ-YDX30G(VQT3L98)_EJ.book 6 ページ ２０１２年４月１２日 木曜日 午後５時３７分
