2-2
5. Upper Case Removal
1. Unscrew 3 screws (D) so that the upper case can
be removed.
6. Bottom Case Removal
CN22(on Sub 1
P.C.Board)CN4(on Main
P.C.Board) CN5 (on Main P.C.Board) CN6 (on Main
P.C.Board) And disconnect the CRT anode
connector so That the bottom case can be
removed.
Casually disconnect the following connectors.
Note: When assembling the case, make sure
that the gaskets are not degraded.
7. CRT Unit Removal
1. Unscrew 2 screws (E) and 1 screw (F).
2. Slowly and carefully pullout the CRT unit.
Caution : 1) Do not wipe the surface of the mirror
because the special corting has
been made on the surface of the
mirror. When cleaning the mirror,
please use lens blower.
Caution : 2) When assembling the case, make
sure that the gasket is not degraded.
screw (D)
screw (D)
anode connector
CN5
CN6
CN22
gaskets
CN4
(E)
(F)
(E)
gaskets
