46 (E)
CONTENTS
Setup menus
The underlined items indicates the initial setting.
USER menu
<VIDEO>
No./Item
Description
No./Item
Description
600
INT SG
This selects the internal reference signal.
0001
BB :
The black burst is generated.
0002
CB100 :
100% colour bars are generated.
0003
CB75 :
75% colour bars are generated.
601
OUT VSYNC
This selects whether to float the vertical sync
position of the video output in order to align
the video output phase with the input in the
EE/record/edit modes.
0000
N-VF :
Signals are not floated.
0001
VF :
Signals are floated.
602
V-MUTE SEL
This selects whether to mute the video output
signals when a blank on the tape has been
detected during playback.
0000 N-MUTE :
No muting. (Freeze)
0001 LOW RF :
Muting. (Set to gray.)
606
OUT C KILL
This selects chroma colour killer processing
for the video output signals.
0000
B/W :
No colour signals are output.
0001 COLOR :
Colour signals are output.
609
EDH
This selects whether to superimpose EDH
onto the SDI output signals.
0000
OFF :
EDH is not superimposed.
0001
ON :
EDH is superimposed.
<Notes>
O
Even when ON is selected for this setting, EDH
is not superimposed onto the signals output
from the SDI OUT 3 connector if the SUPER
switch on the front panel of the unit is set to
ON.
O
When no optional board (AJ-YA755G) has
been installed, setup menu No. 610 is not
displayed.
611
YC SEP MODE
This selects Y/C separation processing for
the composite input signals.
0000
B/W :
The signals are processed as B/W signals.
0001
AUTO :
The signals are automatically detected.
618
INTERPOLATE
This selects the interpolation operation.
Vertical interpolation is conducted automatically
during slow-motion playback to reduce the
vertical movement of the playback pictures.
However, this menu item enables the
interpolation operation to be forcibly turned off.
0000
OFF :
Interpolation is forcibly turned off.
0001
AUTO :
Interpolation is automatically turned on during
slow-motion playback.
605
FREEZE SEL
This selects the freeze mode for still pictures.
0000
FIELD :
Field freeze.
0001 FRAME :
Frame freeze.
<Note>
When frame freeze has been selected, the frame
slow status is established with the slow setting.
620
ESR MODE
This selects the operation mode for edge
subcarrier reduction (ESR) in the playback
circuit.
0000
OFF :
The mode is forcibly set to OFF.
0001
AUTO :
The mode is automatically set to ON or OFF
depending on the VTR operation.
645
WIDE SELECT
This selects whether or not to record the
wide-screen information on the tape.
0001
WIDE :
The wide-screen information is not recorded on
the tape.
0002 NORMAL :
The wide-screen information is recorded on the
tape.
<Note>
If SDTI/1394 has been selected as the input
signals using the INPUT SELECT button, the
wide-screen information on the input signals will
be recorded regardless of this menu’s setting.
