Panasonic AJ-SD965p Скачать руководство пользователя страница 13

Страница: 13 / 86

Front panel

AUDIO MON SEL (L and R) buttons

These buttons are used to select the audio signals
which are to be output to the MONITOR L and R
connectors.
Each time the L button is pressed, the signal to be
output to the MONITOR L connector is changed in
the following sequence: CH1

CH2

CH3

CH4

CUE.

Similarly, each time the R button is pressed, the
signal to be output to the MONITOR R connector is
changed in the following sequence: CH1

CH2

CH3

CH4

CUE.

Which signal has now been selected is displayed by
the lighting of the L or R lamps on the level meter
display.
When AUTO has been selected as the setup menu
No. 721 (MONI CH SEL) setting, the display is
switched in tandem with the monitor output. The
channel to which monitor output is to be switched
automatically can be selected using setup menu No.
735 (MON AUTO SEL).

AUDIO MON SEL (MIX) button

This button is used to select the mixed signals which
are to be output to the MONITOR L and R
connectors.
Each time the AUDIO MON SEL (L) button is
pressed while this button is held down, the signals
to be output to the MONITOR L connector change in
the following sequence: CH1 + CH2

CH3 + CH4

CH1 + CH3

CH2 + CH4

mixing release.

The mixed signals to be output to the MONITOR R
connector are changed in the same way by the
AUDIO MON SEL (R) button.

Audio level control knobs

These knobs are used to adjust the recording and
playback level of the PCM audio signals (CH1, CH2,
CH3 and CH4).
Whether the recording level or the playback level is
to be adjusted is selected using the AUDIO VOL
SEL (REC/PB) switch

Parts and their functions

(continued)

AUDIO VOL SEL (REC/PB) switch

This switches the function of the audio level control
knobs

between recording and playback.

REC:

Adjustment of recording level

PB:

Adjustment of playback level

AUDIO VOL SEL (UNITY/VAR) switch
UNITY:

At this position, the audio signals are recorded or
played back at a fixed level regardless of the
positions of the audio level control knobs

VAR:

At this position, the audio signals are recorded or
played back at the level adjusted by the audio
level control knobs

<Note>

It is not possible to set it so that both the recording
level and playback level can be adjusted.
When REC LEVEL is selected, UNITY (fixed level)
is set for the playback level; when PB LEVEL is
selected, UNITY is set for the recording level.

SET button

When this button is pressed, the data which has
been set using the setup menus is entered.
After the data has been entered, the setup menu
settings are exited, and the original status is
restored.
When the internal time code has been set, the data
which has been set is entered.

[

DIAG button

When this button is pressed, the VTR information is
displayed.
When it is pressed again, the original display is
restored.
The VTR information consists of the “WARNING”
information, “HOURS METER” information and
“UMID” information.
Switching between the display of each type of
information is accomplished by pressing the search
button.
Displayed on the “WARNING” screen are details of
the warnings.
Displayed on the “HOURS METER” screen are the
deck’s serial number, power-on time, drum rotation
time, tape travel time, number of times a cassette
has been loaded, number of times the power has
been turned on and off, and so on.
Displayed on the “UMID INFO” screen are details of
the UMID (Unique Material Identifier) information.