Panasonic AJ-PX800G, Руководство по эксплуатации

Страница: 110 / 220

– 110 –
Chapter 5 Playback — Thumbnail operations
Loading clip metadata (metadata upload)
Fig. 1 Fig. 2
1
Insert the SD memory card that contains the clip metadata (metadata upload file).
2
Select [LOAD] in the main menu → [RECORDING SETUP] → [REC META DATA].
The metadata name of the metadata upload file on the SD memory card is displayed. (Fig. 1)
3
Use the cursor buttons to select the file to be loaded, and select [YES].
f
Upload starts.
f
Uploaded metadata is retained even if the power is turned off.
f
For confirmation of uploaded data, refer to “Checking and modifying uploaded metadata” (page 110).
@ @ NOTE
t
While displaying metadata names, press the cursor button (
I
) to switch to file name display. (Fig. 2)
Press the cursor button (
Y
) to return to metadata name display.
Checking and modifying uploaded metadata
Details of metadata uploaded from an SD memory card can be checked.
Fig. 1 Fig. 2
1
Select [PROPERTY] in the main menu → [RECORDING SETUP] → [REC META DATA].
The metadata list is displayed.
2
Use the cursor buttons to move the cursor over the item to be checked, and press the <SET> button.
Settings of the uploaded metadata can be checked. (Fig. 1)
3
While checking the settings for the metadata, use the cursor buttons to move the cursor over the item where you want to change
the setting, and press the <SET> button.
f
A software keyboard screen is displayed, allowing you to modify the setting. (Fig. 2)
f
While holding down the <SHIFT> button, press the cursor buttons (
`
/
{
) to move to the beginning or end of the setting details to be changed.
Setting whether to record the uploaded metadata
Set [ON]/[OFF] in the main menu → [RECORDING SETUP] → [REC META DATA] → [RECORD]. [OFF] is set in the factory settings.
Selecting the [USER CLIP NAME] recording method
Select the [USER CLIP NAME] recording method from the two of [TYPE1] and [TYPE2] in the main menu → [RECORDING SETUP] → [REC META
DATA] → [USER CLIP NAME].
r
[TYPE1] (factory settings)
Status of clip metadata [USER CLIP NAME] to be recorded
When clip metadata has been loaded Uploaded data