Panasonic AJ-PG50EJ Скачать руководство пользователя страница 92 | Manualshive

Страница: 92 / 136

Panasonic AJ-PG50EJ Скачать руководство пользователя страница 92

92

Setup Menu: Menu List

Menu List

The CLIP menu is enabled in thumbnail screen mode. (It is disabled in recording/playback screen mode.)

CLIP > PROPERTY

_ is the factory default setting.

CLIP > PROPERTY

_ is the factory default setting.

CLIP

PROPERTY

Item

Settings and brief function description

FREQ indications

CLIP PROPERTY

Displays detailed clip information on the screen. Individual items can also be edited. For de-
tails, refer to “Viewing and Editing the Clip Information” (

➝

page 50).

CARD STATUS

Displays the card status of the P2 card slots. For details, refer to “Checking the Card Status”
(

➝

page 54).

CPS PASSWORD

Sets the CPS encryption password for microP2 memory cards.

LOAD:

Loads the CPS password from an SD memory card.

SET:

Enter a CPS password.

DELETE:

Deletes the password stored on the unit and disables the encryption format.

SD CARD

Displays SD memory card information.
“SD CARD PROPERTY” (

➝

page 111)

REMAIN SETUP

Sets whether to display the remaining free space or used space when displaying P2 card
information.

REMAIN:

Remaining free space indication

USED:

Used space indication

FREE CAP. OF

PARTITION

Displays the free space on a partition.

Note:

This is displayed while the thumbnail screen for the [TYPE S] storage device is displayed.

Item

Settings and brief function description

FREQ indications

REPOSITION

Selects the clips to display in the thumbnail screen.

ALL CLIP

:

Displays thumbnails for all clips.

SAME FORMAT CLIP

:

Displays thumbnails only for clips recorded in the same format as the system format and with
the same audio bit rate as that set in the “AUDIO SMPL RES” (

➝

page 114) menu item.

SELECTED CLIPS:

Displays thumbnails only for clips selected using the [SET] button. The thumbnails are dis-
played in the order of selection.

MARKED CLIPS:

Displays thumbnails only for clips with shot marks added.

TEXT MEMO CLIPS:

Displays thumbnails only for clips with text memo data.

SLOT CLIPS:

Displays only clips in selected slots as thumbnails.

NG CLIPS:

Displays only the clips with the defective clip indicator as thumbnails.

DELETE

Deletes the selected clips.

Note:

To stop deletion, press the [SET] or [CANCEL] button to cancel the operation. Partially de-
leted clips cannot be restored even if you cancel deletion.

59.94Hz

50Hz

59.94Hz

50Hz

59.94Hz

50Hz

59.94Hz

50Hz

59.94Hz

50Hz

59.94Hz

50Hz

59.94Hz

50Hz

59.94Hz

50Hz

«
...
90
91
92
93
94
...
»

Содержание AJ-PG50EJ









































































































































Отзывы:

Нет отзывов