![background image](http://html1.mh-extra.com/html/panasonic/aj-hdc27fe/aj-hdc27fe_operating-instructions-manual_3811608128.webp)
128 (E)
Inspections prior to shooting
Perform the following inspections prior to shooting to
check that the systems are operating properly.
It is recommended that the images be checked using
a colour monitor.
Preparation for inspection
1
Insert a fully charged battery.
Set the camera unit’s switches as shown in the figure
below.
Inspecting the camera unit
Aperture:
Automatic
Zoom:
Automatic
WHITE BAL:
A or B
OUTPUT/AUTO
KNEE:
BARS
VTR SAVE/STBY:
STBY
2
Set the POWER switch to ON, and check that the
HUMID display has not come on and that at least 5
segments of the BATTERY display are lit.
O
If the HUMID display has come on, wait until it
goes off.
O
If fewer than 5 segments of the BATTERY
display have lit, replace the battery with one
having an adequate charge.
3
After checking that there are no cables near the
cassette holder or top panel, press the EJECT
button to open the cassette holder.
4
After checking the following points, load the
cassette tape and close the cassette holder.
O
The cassette tape must not be set to the
accidental erasure prevention mode.
O
There must be no tape slack.
1
2
4
2
3
GAIN:
Normally set to 0 dB; change
to a more suitable value if
the picture is too dark.
Содержание AJ-HDC27FE
Страница 1: ...AJ E Camera VTR Operating Instructions ...
Страница 135: ......