Panasonic AJ-HDC27AP, Руководство по эксплуатации

Страница: 45 / 116

45
CH
1
CH
2
20
0
EMPHASIS
40
-dB
10
30
E
BATT
F
TAPE
RF SERVO HUMID SLACK
DF SLAVE TCG HOLD
h min s frm
Screen displays
Displays relating to errors and
warnings
For details, refer to “Warning system” (pages 105 and
106).
Remaining tape display
When there are 21 or more minutes of the tape remaining,
all 7 segments up to the “F” position light.
When there are less than 21 minutes of the tape
remaining, the segments go out one by one in sequence
every 3 minutes.
Remaining battery charge display
If a battery with a digital display (% display) is used, all 7
segments up to the “F” position light when the 70% or
more of the battery charge remains.
When there is less than 70% of the battery charge
remaining, the segments go out one by one in sequence
every time the remaining charge drops by 10%.
Audio channel level meter
CH
1
CH
2
20
0
EMPHASIS
40
-dB
10
30
E
BATT
F
TAPE
RF SERVO HUMID SLACK
DF SLAVE TCG HOLD
h min s frm
Error code display
Warning displays
RF
: Clogged video head
SERVO: Servo disturbance
HUMID : Formation of condensation on the head drum
SLACK : Problem in tape take-up
Displays relating to time codes
Time code-related switch settings and display
items
CH
1
CH
2
20
0
EMPHASIS
40
-dB
10
30
E
BATT
F
TAPE
RF SERVO HUMID SLACK
DF SLAVE TCG HOLD
h min s frm
Time counter display
This displays the time code, CTL, user’s bit and actual
time. For the correlation between the items displayed and
the switches, refer to the next section.
These displays light for the time code, CTL and actual
time
DF
: Drop frame mode
SLAVE : External locking of the time code
HOLD : Time code generator in the hold mode (when the
HOLD button has been pressed)
TCG switch
position
DISPLAY switch
position
Display item
SET
TC or CTL Time code
F-RUN or R-RUN
UB User’s bit
CTL CTL
TC Time code
UB User’s bit
<Note>
If the HOLD button is pressed while the DISPLAY
switch is set to UB, “HOLD” on the counter display will
flash for as long as the switch is held down, and the
VITC user’s bit information recorded in the video AUX
area will appear on the counter display.
Remaining battery charge and
audio channel level and
remaining tape displays