35
Mounting the unit on a tripod
1
Attach the tripod attachment to the tripod.
<Note>
Select the attachment holes that best support the
center of gravity of the unit and tripod attachment.
Check that the diameters of the selected holes
match the diameters of the pan head.
2
Attach the camera to the tripod attachment.
Slide the camera toward the front along the
grooves until it clicks into place.
Use the tripod attachment available as an optional
accessory for mounting the unit onto a tripod.
Pan head
Tripod attachment
Red lever
Tripod attachment
Detaching the unit from the tripod attachment
While pressing the red lever, move the black lever in
the direction of the arrow, slide the unit toward the
rear, and detach it.
Black lever
<Note>
If the pins in the tripod attachment fail to return to
their original positions after the camera has been
detached, press the red lever again and at the same
time move the black lever in the direction of the
arrow: this will return the pins to their original
positions.
Bear in mind that the camera cannot be attached
while the pins are left in the center.
Содержание AJ-HDC20
Страница 1: ...AJ P Camera VTR Operating Instructions ...
