Panasonic AIG707WCL1G2, Руководство пользователя

Страница: 23 / 54

3.2 Wiring the Power Supply
3.2.3 Wiring of Terminal Block

Layout of terminal block for power supply
Pin No. Function
1 +24 V
2 0 V
3 Functional ground

Suitable wires (strand wire)
Size
Nominal cross-
sectional area
Rated temperature Tightening torque
AWG24 to 16 0.2 to 1.25 mm
2
75 ° C or more
0.5 to 0.55 N
･
m

Wiring method
• When removing the wire's insulation, be careful not to scratch the core wire.
• Do not twist the wires to connect them.
• Do not solder the wires to connect them. The solder may break due to vibration.
• For tightening the terminal block, use a flat-blade screwdriver with a blade size of 0.5 x 3 mm.
• After wiring, make sure stress is not applied to the wire.
• In the terminal block socket construction, if the wire is fastened upon counter-clockwise
rotation of the screw, the connection is faulty. Disconnect the wire, check the terminal hole,
and then re-connect the wire.
1. Remove a portion of the wire's insulation.
2. Insert the wire into the terminal block until it contacts the back side.
3. Tighten the screw clockwise to fix the wire in place.
3-7