EX TAPE NEAR END FLUO.
48K
C
H
2
iREC TCG 12:34:56:00
0dB
1100 LOW LIGHT
DJan-01-01 23:59:00
=========
¢¢¢
min 13.
4V
Z78
ATW
F56
C
H
1
AWB+02
32K
.
.
SPOT QUICK FOCUS
¢
1
¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢
¢
2
¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢
FL1
/
2
1
<
4
5
6
7
8
9
:
;
G
H
F
D
E
C
B
A
@
?
>
=
I
16
EX TAPE NEAR END FLUO.
48K
C
H
2
TCG 12:34:56.00 NDF
SHUT :OFF SKIN :OFF
!
¢¢¢¢¢¢¢¢¢¢¢¢
DJan-01-01 23:59:00
=========
¢¢¢
min 13.
4V
WHITE :A 3.6K
KNEE :MANUAL A.IRIS:BACK
SCENE F1:FLUO.
GAIN :0dB GAMMA :NORMAL
FILTER:1 COLOR :+10
C
H
1
Viewfinder displays
REC
BATT
VTR
SAVE
1
3
2
3
4
In addition to the images, messages indicating the unit’s settings
and the operation mode appear on the viewfinder screen.
Also displayed are the center marker and safety zone markers.
At the top, bottom and right edges of the screen are the items which
have been set to ON using the sub-menu <MARKER/ZEBRA>, <VF
DISPLAY 1/2> and <VF DISPLAY 2/2> screens or the switches
relating to the viewfinder displays. When a setting has been
changed or an adjustment is made, a message informing the user
of the setting details, adjustment transition status and adjustment
result is displayed for about 3 seconds.
For further details, refer to the items concerned on the sub-menu
<MARKER/ZEBRA>, <VF DISPLAY 1/2>, <VF DISPLAY 2/2>,
<!LED>, <CAMERA ID> and <TIME DATE> screens.
J
J
The displays shown in the example are those of the AJ-VF10.
(For details on the viewfinder, refer to the operating instructions of
the viewfinder available as an optional accessory.)
1
REC (record) lamp
This lights up red during recording. It flashes when an error has
occurred. For further details, refer to “Warning system” (page
38).
3
BATT (battery) lamp
This starts flashing several minutes before the battery voltage
drops to the level where the battery can no longer be used, and
it remains lighted when the battery can no longer be used. To
prevent an interruption to operation, replace the battery before
the battery becomes completely discharged. For further details,
refer to “Warning system” (page 38).
Viewfinder lamp displays
Viewfinder screen status displays
Status displays on the viewfinder screen when the
MODE CHECK switch is ON (normal)
EX TAPE NEAR END FULL
48K
C
H
2
TCG 12:34:56.00 NDF
!
¢¢¢¢¢¢¢¢¢¢¢¢
DJan-01-01 23:59:00
=========
¢¢¢
min 13.
4V
FULL AUTO
FILTER:1
SCENE F1:FLUO.
GAMMA :NORMAL
SKIN :OFF
C
H
1
Status displays on the viewfinder screen when the
MODE CHECK switch is ON (FULL AUTO)
2
(irregular operation status warning) lamp
This lights up when the unit is placed in an irregular operation
status for any of the items set to ON in the sub-menu <!LED>.
For details on selecting the items subject to the
lamp
display, refer to sub-menu <!LED> (page 37).
4
VTR SAVE (VTR power-saving) lamp
This lights up when the VTR SAVE/STBY switch is set to SAVE.
It goes off during recording.
<Note>
After the period set for the pause timer is exceeded during Rec
Pause, or after 1 minute has passed during Pause (Still), the
unit will automatically switch to SAVE mode and the lamp will
light, regardless of the VTR SAVE/STBY switch position.
Содержание AGDVC200 - DV CAMCORDER
Страница 10: ......
