Panasonic AG-UX90, Руководство по эксплуатации

Страница: 94 / 206

- 94 -
≥
Register “Auto Iris Level” to a USER button. ( l 79 )
This enables/disables the Auto Iris Level.
≥
When this item is enabled, the [AUTO IRIS LEVEL EFFECT] setting is applied. ( l 65 )
≥ Register “Zebra” to a USER button. ( l 79 )
Press USER button or touch USER button icon in the recording screen.
It will switch between the zebra display and the marker display every time the button is pressed.
Zebra 1
#
Zebra 2
*
#
Marker
*
#
setting canceled
* It is not displayed when the [ZEBRA DETECT 2]/[MARKER] is set to [OFF]. ( l 169 )
Zebra display:
Parts where white saturation (color saturation) is likely to occur (extremely brightly lit or shiny parts)
are displayed with diagonal lines (zebra pattern
A
).
Marker display:
Displays the luminance level of the center of the screen (luminance display frame
B
) in %.
It makes the adjustment of the brightness of the object easier, by checking the luminance level of
the object, when recording same object in different surroundings.
≥ Luminance level
C
is displayed between 0% and 99%. It will be displayed as 99% when it is
over 99%.
≥ This function is not available during Freeze Frame. ( l 86 )
≥
You can record an image with little white saturation if you manually adjust the shutter speed or
brightness not to display zebra pattern. (
l 64 , 69 )
≥
The zebra pattern does not appear on the images actually recorded.
≥ It is also possible to adjust the level of the zebra pattern to be displayed. ( l 169 )
≥
It is also possible to change the [ZEBRA MODE] setting to change the display time for the zebra
pattern display. (
l 157 )
≥
Register “Optical Image Stabilizer” to a USER button. ( l 79 )
This enables/disables the Image Stabilizer. ( l 50 )
Auto Iris Level
Zebra
(When Zebra 1 is set) (When Marker is set)
Optical Image Stabilizer

99%


AG-UX90EJ_DVQP1150ZA.book 94 ページ ２０１６年１０月２０日 木曜日 午前１１時４４分